DataSheetWiki


SMDJ7.0CA fiches techniques PDF

MDE - TVS Diode, SMD (Transient Voltage Suppressor)

Numéro de référence SMDJ7.0CA
Description TVS Diode, SMD (Transient Voltage Suppressor)
Fabricant MDE 
Logo MDE 





1 Page

No Preview Available !





SMDJ7.0CA fiche technique
MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414
1-800-831-4881 Email: [email protected] Web: www.mdesemiconductor.com
SMDJ SERIES
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE-5.0 TO 170 Volts
3000 Watt Peak Pulse Power
FEATURES
• For surface mounted applications in order to
optimize board space
• Low profile package
• Built-in strain relief
• Glass passivated junction
• Low inductance
• Excellent clamping capability
• Repetition rate (duty cycle):0.01%
• Fast response time: typically less than
1.0 ps from 0 volts to BV for unidirectional types
• Typical IR less than 1µA above 10V
• High temperature soldering:
250°C/10 seconds at terminals
• Plastic package has Underwriters Laboratory
Flammability Classification 94 V-O
MECHANICAL DATA
Case: JEDEC DO214AB. Molded plastic over glass
passivated junction
Terminals: Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denoted positive end (cathode)
except Bidirectional
Standard Packaging: 16mm tape (EIA STD RS-481)
Weight: 0.007 ounces, 0.21 grams)
Dimensions in inches and (millimeters)
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA Suffix for types SMDJ5.0 thru types SMDJ170 (e.g. SMDJ5.0C, SMDJ170CA)
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
RATING
SYMBOL
VALUE
Peak Pulse Power Dissipation on 10/1000 µs
waveform (NOTE 1, 2, Fig.1)
PPPM
Minimum 3000
Peak Pulse Current of on 10/1000 µs waveform (Note 1,Fig 3) IPPM SEE TABLE 1
Peak Forward Surge Current, 8.3ms Single Half Sine-wave
Superimposed on Rated Load, (JEDEC Method)(Note2, 3)
IFSM
300
Operatings and Storage Temperature Range
NOTES:
TJ, TSTG
-55 +150
1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.
2. Mounted on 8.0mm x 8.0mm Copper Pads to each terminal.
3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum.
UNITS
Watts
Amps
Amps
°C
Certified RoHS Compliant
UL File # E223026

PagesPages 3
Télécharger [ SMDJ7.0CA ]


Fiche technique recommandé

No Description détaillée Fabricant
SMDJ7.0C TVS Diode, SMD (Transient Voltage Suppressor) PACELEADER
PACELEADER
SMDJ7.0C Surface Mount Transient Voltage Suppressors UN Semiconducctor
UN Semiconducctor
SMDJ7.0CA Transient Voltage Suppression Diodes Littelfuse
Littelfuse
SMDJ7.0CA SURFACE MOUNT MDE
MDE

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche