|
|
PDF SMBJ18 Data sheet ( Hoja de datos )
| Número de pieza | SMBJ18 | |
| Descripción | TVS Diode, SMD (Transient Voltage Suppressor) | |
| Fabricantes | PACELEADER | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SMBJ18 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
SMBJ Series
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
PEAK PULSE POWER 600 WATTS
REVERSE VOLTAGE 6.8 to 520 Volts
.075(1.91)
.083(2.11)
SMB/DO-214AA
.130(3.30)
.155(3.94)
.083(2.13)
.096(2.44)
.030(0.76)
.050(1.27)
.160(4.06)
.185(4.70)
.006(.152)
.012(.305)
.004(.102)
.008(.203)
.200(5.08)
.220(5.59)
Dimensions in inches and (millimeters)
FEATURES
Glass passivated chip
600W peak pulse power capability woth a
10/1000μs waveform, repetitive rate (duty
cycle):0.01%
Low leakage
Uni and Bidirectional unit
Excellent clamping capability
Very fast response time
MECHANICAL DATA
Case Molded plastic
Epoxy: UL 94V-0 rate flame retardant
Lead: Solderable per MIL-STD-750, method
2026
Polarity Color band denotes cathode end
except Bipolar
Mounting position: Any
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specif
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Parameter
Peak power dissipation with a 10/1000μs waveform
Peak pulse current wih a 10/1000μs waveform
Power dissipation on infinite heatsink at TL = 75 °C
Peak forward surge current, 8.3 ms single half sine-
wave unidirectional only(1)
Symbol
PPP
IPP
PD
IFSM
Value
Minimum 600
See Next Table
5.0
100
UNIT
Watts
Amps.
Watts
Amps.
Maximum instantaneous forward voltage at 50 A for
unidirectional only(2)
Operating junction and storage temperature range
VF
TJ, TSTG
3.5/5.0
–55 to +150
Volts
°C
Note:
(1) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
(2) VF= 3.5V on SMBJ5.0 thru SMBJ90A devices and VF= 5.0V onSMBJ100 thru SMBJ440A devices.
www.paceleader.tw
1
1 page  
SMBJ Series
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
TECHNOLOGIES
SMBJ SERIES
Uni-polar
Bi-polar
Device
Marking
Code
Uni Bi
Breakdown voltage VBR @
IT
Min (V) Max (V) IT (mA)
Maximum
Reverse
Leakage
IR(uA)
@VRWM
SMBJ440A SMBJ440CA QM FM
492 543 1
5
Note:
1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device.
2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices.
3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double .
Working
PeakRevers
e Voltage
Maximum
Reverse
Surge
Current
VRWM
(Volts)
Ipp(A)
@10x1000us
sinewave
440 0.84
Maximum
Clamping
Voltage
Vc (Volts)
@Ipp
713
www.paceleader.tw
5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet SMBJ18.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SMBJ10 | TVS Diode ( Rectifier ) |  DEC |
| SMBJ10 | TVS Diode, SMD (Transient Voltage Suppressor) |  Jinan Gude Electronic Device |
| SMBJ10 | UNI- AMD BI-DIRECTIONAL SURFACE MOUNT |  Microsemi Corporation |
| SMBJ10 | SURFACE MOUNT TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR |  General Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |