DataSheetWiki

SMBJ7.5 Datasheet دیتاشیت PDF دانلود

دیتاشیت - LGE - 600 Watts Surface Mount Transient Voltage Suppressor

شماره قطعه SMBJ7.5
شرح مفصل 600 Watts Surface Mount Transient Voltage Suppressor
تولید کننده LGE 
آرم LGE 


1 Page

		

No Preview Available !

SMBJ7.5 شرح
SMBJ SERIES
600 Watts Surface Mount
Transient Voltage Suppressor
Features
SMB/DO-214AA
For surface mounted application
Low profile package
Built-in strain relief
Glass passivated junction
Excellent clamping capability
Fast response time: Typically less than 1.0ps
from 0 volt to BV min.
Typical IR less than 1μA above 10V
High temperature soldering guaranteed:
260oC / 10 seconds at terminals
Plastic material used carries Underwriters
Laboratory Flammability Classification 94V-0
600 watts peak pulse power capability with a 10
x 1000 us waveform by 0.01% duty cycle
0.086(2.20)
0.077(1.95)
0.096(2.44)
0.084(2.13)
0.059(1.50)
0.035(0.90)
0.180(4.57)
0.160(4.06)
0.209(5.30)
0.201(5.10)
0.155(3.94)
0.130(3.30)
0.012(0.30)
0.006(0.15)
0.008(0.20)
0.002(0.05)
Mechanical Data
Case: Molded plastic
Terminals: Pure tin plated lead free,
Polarity: Indicated by cathode band except
bipolar
Dimensions in inches and(millimeters)
Weight: 0.093gram
Maximum Ratings and Electrical Characteristics
Rating at 25 oC ambient temperature unless otherwise specified.
Type Number
Symbol
Value
Units
Peak Power Dissipation at TA=25oC, Tp=1ms (Note 1)
PPK
Minimum 600
Watts
Steady State Power Dissipation
Pd 3 Watts
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load
(JEDEC method) (Note 2, 3) - Unidirectional Only
IFSM
100 Amps
Maximum Instantaneous Forward Voltage at 50.0A for
Unidirectional Only (Note 4)
VF
3.5 / 5.0
Volts
Typical Thermal Resistance (Note 5)
RθJC
RθJA
10
55
oC/W
Operating and Storage Temperature Range
TJ, TSTG
-65 to + 150
Notes:
1. Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25oC Per Fig. 2.
2. Mounted on 5.0mm2 (.013 mm Thick) Copper Pads to Each Terminal.
oC
3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 pulses Per Minute Maximum.
4. VF=3.5V on SMBJ5.0 thru SMBJ90 Devices and VF=5.0V on SMBJ100 thru SMBJ170 Devices.
5. Measured on P.C.B. with 0.27 x 0.27” (7.0 x 7.0mm) Copper Pad Areas.
Devices for Bipolar Applications
1. For Bidrectional Use C or CA Suffix for Types SMBJ5.0 through Types SMBJ170.
2. Electrical Characteristics Apply in Both Directions.
http://www.luguang.cn
mail:lge@luguang.cn

قانون اساسیصفحه 6
دانلود [ SMBJ7.5 دیتاشیت ]



دیتاشیت توصیه

شماره قطعه شرح مفصل تولید کنندگان
SMBJ7.0 Transient Voltage Suppressors DEC
DEC
SMBJ7.0 SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Jinan Gude Electronic Device
Jinan Gude Electronic Device
SMBJ7.0 SURFACE MOUNT TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR General Semiconductor
General Semiconductor
SMBJ7.0 Transient Voltage Suppressor 5.0 to 170 Volts 600 Watt Micro Commercial Components
Micro Commercial Components

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2019   |   تماس با ما  |   جستجو