|
|
Numéro de référence | SMBJ48 | ||
Description | 600 Watts Surface Mount Transient Voltage Suppressor | ||
Fabricant | LGE | ||
Logo | |||
1 Page
SMBJ SERIES
600 Watts Surface Mount
Transient Voltage Suppressor
Features
SMB/DO-214AA
For surface mounted application
Low profile package
Built-in strain relief
Glass passivated junction
Excellent clamping capability
Fast response time: Typically less than 1.0ps
from 0 volt to BV min.
Typical IR less than 1μA above 10V
High temperature soldering guaranteed:
260oC / 10 seconds at terminals
Plastic material used carries Underwriters
Laboratory Flammability Classification 94V-0
600 watts peak pulse power capability with a 10
x 1000 us waveform by 0.01% duty cycle
0.086(2.20)
0.077(1.95)
0.096(2.44)
0.084(2.13)
0.059(1.50)
0.035(0.90)
0.180(4.57)
0.160(4.06)
0.209(5.30)
0.201(5.10)
0.155(3.94)
0.130(3.30)
0.012(0.30)
0.006(0.15)
0.008(0.20)
0.002(0.05)
Mechanical Data
Case: Molded plastic
Terminals: Pure tin plated lead free,
Polarity: Indicated by cathode band except
bipolar
Dimensions in inches and(millimeters)
Weight: 0.093gram
Maximum Ratings and Electrical Characteristics
Rating at 25 oC ambient temperature unless otherwise specified.
Type Number
Symbol
Value
Units
Peak Power Dissipation at TA=25oC, Tp=1ms (Note 1)
PPK
Minimum 600
Watts
Steady State Power Dissipation
Pd 3 Watts
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load
(JEDEC method) (Note 2, 3) - Unidirectional Only
IFSM
100 Amps
Maximum Instantaneous Forward Voltage at 50.0A for
Unidirectional Only (Note 4)
VF
3.5 / 5.0
Volts
Typical Thermal Resistance (Note 5)
RθJC
RθJA
10
55
oC/W
Operating and Storage Temperature Range
TJ, TSTG
-65 to + 150
Notes:
1. Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25oC Per Fig. 2.
2. Mounted on 5.0mm2 (.013 mm Thick) Copper Pads to Each Terminal.
oC
3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 pulses Per Minute Maximum.
4. VF=3.5V on SMBJ5.0 thru SMBJ90 Devices and VF=5.0V on SMBJ100 thru SMBJ170 Devices.
5. Measured on P.C.B. with 0.27 x 0.27” (7.0 x 7.0mm) Copper Pad Areas.
Devices for Bipolar Applications
1. For Bidrectional Use C or CA Suffix for Types SMBJ5.0 through Types SMBJ170.
2. Electrical Characteristics Apply in Both Directions.
http://www.luguang.cn
mail:[email protected]
|
|||
Pages | Pages 6 | ||
Télécharger | [ SMBJ48 ] |
No | Description détaillée | Fabricant |
SMBJ40 | TVS Diode ( Rectifier ) | DEC |
SMBJ40 | TVS Diode, SMD (Transient Voltage Suppressor) | Jinan Gude Electronic Device |
SMBJ40 | UNI- AMD BI-DIRECTIONAL SURFACE MOUNT | Microsemi Corporation |
SMBJ40 | SURFACE MOUNT TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR | General Semiconductor |
US18650VTC5A | Lithium-Ion Battery | Sony |
TSPC106 | PCI Bus Bridge Memory Controller | ATMEL |
TP9380 | NPN SILICON RF POWER TRANSISTOR | Advanced Semiconductor |
www.DataSheetWiki.com | 2020 | Contactez-nous | Recherche |