|
|
PDF CMA-5043 Data sheet ( Hoja de datos )
| Número de pieza | CMA-5043 | |
| Descripción | Monolithic Amplifier | |
| Fabricantes | Mini-Circuits | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de CMA-5043 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
LMowoNoniseo, HliigthhIPi3c Amplifier
50Ω 0.05 to 4 GHz
The Big Deal
• Ceramic, Hermetically Sealed, Nitrogen filled
• Low profile case, .045” high
• Ultra Low Noise Figure, 0.75 dB
• High IP3 and Po at low DC power consumption
• Class 1B HBM ESD rating (500V)
CMA-5043+
CASE STYLE: DL1721
Product Overview
Mini-Circuits CMA-5043+ is a E-PHEMT based Ultra-Low Noise MMIC Amplifier operating from 50 MHz to
4 GHz with a unique combination of low noise and high IP3 making this amplifier ideal for sensitive high
dynamic range receiver applications. This design operates on +3 to +5V supply at only 33 mA at 3V and
56mA at +5V, is internally matched to 50 ohms. The MMIC amplifier is bonded to a multilayer integrated
LTCC substrate and then hermetically sealed under a controlled nitrogen atmosphere with gold-plated
covers and eutectic AuSn solder. These amplifiers have been tested to MIL requirements for gross leak, fine
leak, thermal shock, vibration, acceleration, mechanical shock, and HTOL.
Key Features
Feature
Ultra Low Noise:
0.75 dB at 1 GHz
0.98 dB at 2 GHz
Advantages
Outstanding Noise Figure, ideal for low noise input stages of receivers
High IP3, 33.5 dBm
Combining Low Noise and High IP3 makes this MMIC amplifier ideal for Low Noise
Receiver Front End (RFE) because it gives the user advantages at both ends of the dynamic
range: sensitivity & two-tone spur-free dynamic range
High Output Power, +21 dBm
Broad Band, up to 4 GHz
The CMA-5043+ provides up to +21dBm output power at 1dB compression enabling this amplifier
to support high linear dynamic range requirements
Operating over a broadband from 50 MHz to 4 GHz, the CMA-5043+ covers the primary wireless
communications bands: Cellular, PCS, LTE, WiMAX
Internally Matched
Ceramic Hermetic Package
No external matching elements required to achieve the advertised noise and output power over the
full band
Low inductance, repeatable performance, excellent reliability
High Reliability
Class 1B ESD (500V, HBM)
Low, small signal operating current of 53mA nominal maintains junction temperatures typically
below 125°C at 85°C ground lead temperature
The CMA-5043+ is a super low noise PHEMT based design. Unlike many other PHEMT designs.
Mini-Circuits incorporates ESD protection on die to achieve industry leading ESD performance for
a low noise amplifier
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]
Page 1 of 5
1 page  
Monolithic E-PHEMT MMIC Amplifier
CMA-5043+
Additional Detailed Technical Information
additional information is available on our dash board. To access this information click here
Performance Data
Case Style
Tape & Reel
Standard quantities available on reel
Suggested Layout for PCB Design
Evaluation Board
Environmental Ratings
Data Table
Swept Graphs
S-Parameter (S2P Files) Data Set (.zip file)
DL1721
Ceramic package, exposed paddle, Terminla finish: NiPdAu
F66-1
7” reels with 20, 50, 100, 200, 500 or 1K, 2K devices.
PL-366
TB-757+
ENV-68
ESD Rating
Human Body Model (HBM): Class 1B (500 to <1000V) in accordance with ANSI/ESD STM 5.1 - 2001
Machine Model (MM): Class M1 (pass 35V) in accordance with ANSI/ESD STM5.2-1999
MSL Rating
Moisture Sensitivity: MSL1 (these parts are hermetic, air cavity and therefore, MSL ratings do not strictly
apply. For handling purpose, use MSL1)
Qualification Testing
Test Description
1 Hermeticity (fine and gross leak)
2 Acceleration, 30Kg, Y1 Direction
3 Vibration , 10-2000Hz sine, 20g, 3 axis
4 Mechanical shock
5 PIND 20G’s @130 Hz
6 Temp Cycle -55C/+125C, 1000 Cycles
7 Autoclave, 121C, RH 100%, 15 Psig, 96 hrs
8 HTOL, 1000hrs, 105C at rated Voltage condition
9 Bend Test
10 Resistance to soldering heat, 3x reflow, 260C peak
11 Drop Test
12 Adhesion Strength
Test Method/Process
MIL-STD-202 Method 112, Cond. C & D
MIL-STD-883 Method 2001 Cond. E
MIL-STD-202 Method 204, Cond. D
MIL-STD-202 Method 213, Cond . A
MIL-STD-750 Method 2052.2
MIL-STD-202 Method 107
JESD22-A102C
MIL-STD-202 Method 108, Cond . D
JESD22-B113
JESD22-B102
JESD22-B111
Push Test>10 lb
Results
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Additional Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended
to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s
applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms
and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits
contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder,
NA.oPteesrforma ncepalnedaqsuealvityisaitttrMibuintei-sCainrdcucoitnsd’itwioensbsnoitteexaptrewsswlyws.tmateindiicnirthcius istpse.ccoificmat/iMonCdLocSutmoerent/taerermintse.njsdepd to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]
Page 5 of 5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet CMA-5043.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| CMA-5043 | Monolithic Amplifier | Mini-Circuits |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |