DataSheetWiki


1N6378 fiches techniques PDF

MDE - GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

Numéro de référence 1N6378
Description GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
Fabricant MDE 
Logo MDE 





1 Page

No Preview Available !





1N6378 fiche technique
MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414
1-800-831-4881 Email: [email protected] Web: www.mdesemiconductor.com
ICTE5.0 to ICTE15C MPTE-5 to MPTE-45
1N6373 to 1N6381 and 1N6382 to 1N6389
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
STANDOFF VOLTAGE- 5.0 to 45.0V
1500 Watt Peak Power
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Classification 94 V-O
• Glass passivated chip junction in Molded Plastic package
• 1500W surge capability at 1ms
• Excellent clamping capability
• Low zener inpedance
• Fast response time: typically less than
1.0 ps from 0 volts to BV min.
• Typical IR less than 1µA above 10V
• High temperature soldering guaranteed:
250°C/10 seconds/ .375", (9.5mm) lead
length, 5lbs., (2.3kg) tension
• Includes 1N6373 thru 1N6385
MECHANICAL DATA
Case: JEDEC DO-201 Molded plastic
Terminals: Plated Axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denoted positive end (cathode)
except Bipolar
Mounting Position: Any
Weight: 0.045 ounces, 1.2 grams
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
RATING
SYMBOL
Peak Pulse Power Dissipation at TA = 25 °C, TP = 1ms
(NOTE 1)
PPPM
Peak Pulse Current of on 10/1000 µs waveform (Note 1)
Steady State Power Dissipation at TL = 75°C
Lead lengths .375", 9.5mm (Note 2)
IPPM
PM(AV)
Peak Forward Surge Current, 8.3ms Single Half Sine-wave
Superimposed on Rated Load, (JEDEC Method)(Note 3)
IFSM
Maximum instantaneous forward voltage at 100A for
unidirectional only
VF
Operatings and Storage Temperature Range
TJ, TSTG
VALUE
Minimum 1500
SEE TABLE 1
5.0
200
3.5
-55 +175
UNITS
Watts
Amps
Watts
Amps
Volt
°C
NOTES:
1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.
2. Mounted on Copper Pad area of 0.8x0.8" (20x20mm) per Fig.5.
3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum.
Certified RoHS Compliant
UL File # E223026
11/13/2013

PagesPages 2
Télécharger [ 1N6378 ]


Fiche technique recommandé

No Description détaillée Fabricant
1N6370 Transient Voltage Suppressor Digitron Semiconductors
Digitron Semiconductors
1N6370 1500 Watt Low Clamping Factor Transient Voltage Suppressor Microsemi
Microsemi
1N6371 1500 Watt Low Clamping Factor Transient Voltage Suppressor Microsemi
Microsemi
1N6372 1500 Watt Low Clamping Factor Transient Voltage Suppressor Microsemi
Microsemi

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche