DataSheetWiki


1N6375 fiches techniques PDF

Vishay - TVS Diode ( Rectifier )

Numéro de référence 1N6375
Description TVS Diode ( Rectifier )
Fabricant Vishay 
Logo Vishay 





1 Page

No Preview Available !





1N6375 fiche technique
www.vishay.com
ICTE5 thru ICTE18C, 1N6373 thru 1N6386
Vishay General Semiconductor
TRANSZORB® Transient Voltage Suppressors
Case Style 1.5KE
PRIMARY CHARACTERISTICS
VWM
5.0 V to 18 V
VBR (uni-directional)
6.0 V to 21.2 V
VBR (bi-directional)
9.2 V to 21.2 V
PPPM
1500 W
PD 6.5 W
IFSM
200 A
TJ max.
175 °C
Polarity
Uni-directional, bi-directional
Package
1.5KE
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional types, use C suffix (e.g. ICTE18C).
Electrical characteristics apply in both directions.
FEATURES
• Glass passivated chip junction
• Available in uni-directional and bi-directional
• 1500 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate (duty
cycle): 0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, and telecommunication.
MECHANICAL DATA
Case: Molded epoxy body over passivated junction
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant and commercial grade
Base P/NHE3 - RoHS compliant and AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: For uni-directional types the color band denotes
cathode end, no marking on bi-directional types
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig. 1)
Peak pulse current with a 10/1000 μs waveform (1) (fig. 3)
Power dissipation on infinite heatsink at TL = 75 °C (fig. 8)
Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2)
Maximum instantaneous forward voltage at 100 A for uni-directional only
Operating junction and storage temperature range
Notes
(1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
(2) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minute maximum
SYMBOL
PPPM
IPPM
PD
IFSM
VF
TJ, TSTG
LIMIT
1500
See next table
6.5
200
3.5
- 55 to + 175
UNIT
W
A
W
A
V
°C
Revision: 18-Sep-12
1 Document Number: 88356
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PagesPages 5
Télécharger [ 1N6375 ]


Fiche technique recommandé

No Description détaillée Fabricant
1N6370 Transient Voltage Suppressor Digitron Semiconductors
Digitron Semiconductors
1N6370 1500 Watt Low Clamping Factor Transient Voltage Suppressor Microsemi
Microsemi
1N6371 1500 Watt Low Clamping Factor Transient Voltage Suppressor Microsemi
Microsemi
1N6372 1500 Watt Low Clamping Factor Transient Voltage Suppressor Microsemi
Microsemi

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche