DataSheetWiki


MAAV-007092 fiches techniques PDF

MA-COM - Voltage Variable Absorptive Attenuator

Numéro de référence MAAV-007092
Description Voltage Variable Absorptive Attenuator
Fabricant MA-COM 
Logo MA-COM 





1 Page

No Preview Available !





MAAV-007092 fiche technique
MAAV-007092
Voltage Variable Absorptive
Attenuator, 800 - 1000 MHz
Rev. V2
Features
Input IP3: +35 dBm Min (Full Attenuation Range)
Input IP3 is 15 -20 dB Better than GaAs
Linear Operation: +20 dBm Typ.
Plastic, 28 Lead, 6 mm CSP, SMT Package
35 dB Dynamic Range (With 30 mA Bias Current)
Single Control Voltage
50 ohm Impedance
Linear Driver, MADR-007098-000100, Available
Test Boards are Available
Tape and Reel Packaging Available
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of MAAVCC0001
Functional Schematic
Description
M/A-COM's MAAV-007092-000100 is a PIN diode
based voltage variable attenuator. This device is in a
6mm square, 28 lead, plastic CSP Package, suitable
for surface mounting on PCBs. These attenuators
have linear operating power and input intercept point
levels 15 - 20 dB better than GaAs FET MMIC
voltage variable attenuators. They are ideally suited
for use where low distortion, high linear operating
power and high dynamic range are required. These
devices are optimized for the GSM frequency band,
but exhibit excellent performance and repeatability
over the entire specified frequency band. The
MAAV-007092-000100 is ideally suited for wireless
communications systems.
Pin Configuration2
Pin #
1
2
3
4
Function
N/C
N/C
N/C
N/C
Pin #
15
16
17
18
Function
N/C
N/C
N/C
N/C
5 N/C 19 N/C
6 N/C 20 N/C
Ordering Information
Part Number
MAAV-007092-000100
MAAV-007092-0001TR
Package
Bulk Packaging
1000 piece reel
7 N/C 21 N/C
8 N/C 22 N/C
9 BIAS1 23 BIAS 1
10 N/C 24 N/C
11 N/C 25 N/C
12 GND 26 GND
MAAV-007092-0001TB
Sample Test Board
13 RF OUT 27
RF IN
14 GND 28 GND
Note: Reference Application Note M513 for reel size
information.
1. Bias current may be applied to Pin 9 or 23. However, the
unused Pin must be isolated.
2. The exposed pad centered on the package bottom must be
* Restrictions on Hazardous Substances, European Union Directive 2002/95/ECc.onnected to RF and DC ground. (For PQFN Packages)
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support

PagesPages 5
Télécharger [ MAAV-007092 ]


Fiche technique recommandé

No Description détaillée Fabricant
MAAV-007090 Voltage Variable Absorptive Attenuator MA-COM
MA-COM
MAAV-007090-000100 Voltage Variable Attenuator Tyco Electronics
Tyco Electronics
MAAV-007091 Voltage Variable Absorptive Attenuator MA-COM
MA-COM
MAAV-007091-000100 Voltage Variable Attenuator Tyco Electronics
Tyco Electronics

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche