PDF SKY13498-21 Data sheet ( Hoja de datos )

Número de pieza	SKY13498-21
Descripción	Antenna Switch Module
Fabricantes	Skyworks Solutions
Logotipo
Hay una vista previa y un enlace de descarga de SKY13498-21 (archivo pdf) en la parte inferior de esta página. Total 21 Páginas
No Preview Available ! DATA SHEET SKY13498-21: 0.7 to 2.7 GHz SP10T MIPI® Antenna Switch Module Applications  2G/3G/4G multimode cellular handsets (LTE, UMTS, CDMA2000, EDGE, GSM, TDD-LTE, TD-SCDMA)  Embedded data cards Features  Dedicated Band 7 TRX ports: 0.8 dB insertion loss @ 2.7 GHz  High isolation and linearity  Broadband frequency range: 0.7 to 2.7 GHz  Ten linear TRX ports  Integrated low and high band GSM harmonic filters  Integrated MIPI interface  Small MCM (20-pin, 2.5 x 2.5 x 0.8 mm) package (MSL3, 260 C per JEDEC J-STD-020) TRX1 TRX2 TRX3 TRX4 TRX5 ANT TRX6 TRX7 TRX8 TXHB TXLB MIPI Decoder Figure 1. SKY13498-21 Block Diagram Skyworks GreenTM products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Deﬁnition of GreenTM, document number SQ04–0074. ANT 1 20 19 18 17 16 TRX7 TRX6 2 TRX5 3 TRX4 4 TRX3 5 15 TRX8 14 N/C 13 N/C 12 TRX1 MIPI_SELECT 6 7 8 9 10 11 TRX2 S3405 Figure 2. SKY13498-21 Pinout – 20-Pin MCM (Top View) Description The SKY13498-21 is a single-pole, ten-throw (SP10T) antenna switch with an integrated Mobile Industry Processor Interface (MIPI) controller. Using an advanced switching technology, the SKY13498-21 maintains low insertion and high isolation, which makes it an ideal choice for UMTS, CDMA2000, EDGE, GSM, and LTE applications. The design features two dedicated GSM transmit ports and three dedicated ultra low-loss TRX ports. The switch also has an excellent triple beat ratio and Second/Third Order Intermodulation Distortion (IMD2/IMD3) performance. Switching is controlled by the MIPI decoder. There is an external MIPI select pin that enables how the switch responds to power mode triggers. When this pin is grounded, the switch responds to any of the power mode triggers. When this pin is left open, the switch responds to individual power mode triggers. No external DC blocking capacitors are required on the RF paths as long as no DC voltage is applied. The SKY13498-21 is manufactured in a compact, 2.5 x 2.5 x 0.8 mm, 20-pin surface mount Multi-Chip Module (MCM) package. A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202807E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • April 23, 2014 1 1 page DATA SHEET • SKY13498-21: SP10T ANTENNA SWITCH WITH MIPI INTERFACE Table 4. SKY13498-21 RF Electrical Specifications (Note 1) (2 of 2) (VDD = 2.85 V, TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Symbol Test Condition Min Isolation ISO TRx 1, 2, 7, 8 ports to TRx 3, 4, 5, 6 ports: 824 to 1910 MHz 32 1910 to 2690 MHz 25 Tx LB to any TRx/Rx ports: 824 to 915 MHz 35 Tx HB to any TRx/Rx ports: 1710 to 1910 MHz 31 Any adjacent ports: 824 to1910 MHz 1910 to 2690 MHz 20 17 Any non-adjacent ports: 824 to 1910 MHz 1910 to 2690MHz 25 20 Antenna to any TRx ports: 824 to 1910 MHz 1910 to 2690 MHz 30 23 Tx LB to Tx HB when TX HB is on: 1648 to 1830 MHz 27 GSM harmonics: High band 2fo, 3fo PIN = +33 dBm, 50 Ω PIN = +33 dBm, 3:1 VSWR Low band PIN = +35 dBm, 50 Ω PIN = +35 dBm, 3:1 VSWR TRXx harmonics 2fo, 3fo PIN = +27 dBm, 50 Ω, f = 704 to 2700 MHz PIN = +27 dBm, 5:1 VSWR, f = 704 to 2700 MHz TRX1 through TRX8, band 13 2nd harmonics 2fo PIN = +25 dBm, f = 787 MHz Second Order Intermodulation Distortion IMD2 See test conditions in Table 5 Third Order Intermodulation Distortion IMD3 See test conditions in Table 6 Triple Beat Ratio: 650 to 900 MHz 1710 to 2155 MHz TBR See test conditions in Table 7 +81 +81 Turn–on time tON From application of VDD and VIO Switching speed tS Port to port Note 1: Performance is guaranteed only under the conditions listed in this table. Typical 35 30 36 32 23 19 28 23 32 26.5 33 –53 –41 –50 –36 –68 –47 –84 –110 –110 2 Max –44 –45 –62 –45 –105 –105 20 5 Units dB dB dB dB dB dB dB dB dB dB dB dBm dBm dBm dBm dBm dBm dBm dBm dBm dBc dBc μs μs Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202807E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • April 23, 2014 5 5 Page DATA SHEET • SKY13498-21: SP10T ANTENNA SWITCH WITH MIPI INTERFACE Signal Generator fFUND = 1950 MHz, +20 dBm Circulator Coupler to Monitor Input Power fBLK 1760 MHz, –15 dBm fFUND 1950 MHz, +20 dBm fRX 2140 MHz, Measure Tone 1950 MHz Bandpass Filter Duplexer Phase Shifter SKY13498 fFUND = +20 dBm fBLK = –15 dBm Circulator 1760 MHz Bandpass Filter Signal Generator fBLK = 1760 MHz, –15 dBm Spectrum Analyzer fRX = 2140 MHz Figure 3. Third Order Intermodulation Test Setup S3407 Table 11. Command Sequence Bit Definitions Type SSC C11 – C8 Reg0 Y SA[3:0] Write Reg Y SA[3:0] Write Reg Y SA[3:0] Read Legend: SSC = Sequence start command C = Command frame bits C7 C6 – C5 C4 1 Data[6:5] Data[4] 0 10 Addr[4] 0 11 Addr[4] DA = Data/address frame bits BPC = Bus park cycle Parity DA7(1) – C3–C0 Bits BPC DA0(1) Data{3:0] Y Y – Addr[3:0] Y – Data[7:0] Addr[3:0] Y Y Data[7:0] BC = Byte count (# of consecutive addresses) Extended Operation Parity DA7(n) – Bits BPC DA0(n) –– – –– – –– – Parity Bits – Y Y BPC – Y Y Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202807E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • April 23, 2014 11 11 Page

Páginas	Total 21 Páginas
PDF Descargar	[ Datasheet SKY13498-21.PDF ]

Hoja de datos destacado

Número de pieza	Descripción	Fabricantes
SKY13498-21	Antenna Switch Module	Skyworks Solutions

Número de pieza	Descripción	Fabricantes
SLA6805M	High Voltage 3 phase Motor Driver IC.	Sanken
SDC1742	12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.	Analog Devices

DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.

DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar