DataSheetWiki


SMLJ90CA fiches techniques PDF

MDE - TVS Diode, SMD (Transient Voltage Suppressor)

Numéro de référence SMLJ90CA
Description TVS Diode, SMD (Transient Voltage Suppressor)
Fabricant MDE 
Logo MDE 





1 Page

No Preview Available !





SMLJ90CA fiche technique
MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414
1-800-831-4881 Email: [email protected] Web: www.mdesemiconductor.com
SMLJ SERIES
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE-5.0 TO 170 Volts
3000 Watt Peak Pulse Power
FEATURES
• For surface mounted applications in order to
optimize board space
• Low profile package
• Built-in strain relief
• Glass passivated junction
• Low inductance
• Excellent clamping capability
• Repetition rate (duty cycle):0.01%
• Fast response time: typically less than
1.0 ps from 0 volts to BV for unidirectional types
• Typical IR less than 1µA above 10V
• High temperature soldering:
250°C/10 seconds at terminals
• Plastic package has Underwriters Laboratory
Flammability Classification 94 V-O
MECHANICAL DATA
DO-214AB (SMC J-Bend)
Cathode Band
0.126 (3.20)
0.114 (2.90)
0.245 (6.22)
0.220 (5.59)
0.103 (2.62)
0.079 (2.06)
0.280 (7.11)
0.260 (6.60)
0.012 (0.305)
0.006 (0.152)
0.060 (1.52)
0.030 (0.76)
0.008 (0.203) MAX.
0.320 (8.13)
0.305 (7.75)
Dimensions in inches and(millimeters)
Case: JEDEC DO214AB. Molded plastic over glass
passivated junction
Terminals: Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denoted positive end (cathode)
except Bidirectional
Standard Packaging: 12mm tape (EIA STD RS-481)
Weight: 0.007 ounces, 0.21 grams)
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA Suffix for types SMLJ5.0 thru types SMLJ170 (e.g. SMLJ5.0C, SMLJ170CA)
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
RATING
SYMBOL
VALUE
Peak Pulse Power Dissipation on 10/1000 µs
waveform (NOTE 1, 2, Fig.1)
PPPM
Minimum 3000
Peak Pulse Current of on 10/1000 µs waveform (Note 1,Fig 3)
IPPM SEE TABLE 1
Peak Forward Surge Current, 8.3ms Single Half Sine-wave
Superimposed on Rated Load, (JEDEC Method)(Note2, 3)
IFSM
300
Operatings and Storage Temperature Range
NOTES:
TJ, TSTG
-55 +150
1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.
2. Mounted on Copper Pad area of 8.0mm x 8.0mm (20x20mm) per Fig.5.
3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum.
UNITS
Watts
Amps
Amps
°C
Certified RoHS Compliant
UL File # E223026
11/13/2013

PagesPages 3
Télécharger [ SMLJ90CA ]


Fiche technique recommandé

No Description détaillée Fabricant
SMLJ90C Transient Voltage Suppressor 5.0 to 170 Volts 3000 Watt Micro Commercial Components
Micro Commercial Components
SMLJ90CA Transient Voltage Suppressor 5.0 to 170 Volts 3000 Watt Micro Commercial Components
Micro Commercial Components
SMLJ90CA TVS Diode, SMD (Transient Voltage Suppressor) MDE
MDE

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche