LC88F85D0A Datasheet PDF - Sanyo
| Part Number | LC88F85D0A | |
| Description | 16-bit 1-chip Microcontroller | |
| Manufacturers | Sanyo | |
| Logo |  |
|
|
There is a preview and LC88F85D0A download ( pdf file ) link at the bottom of this page. Total 30 Pages | ||
Preview 1 page No Preview Available !
Ordering number : ENA1954
LC88F85D0A
CMOS IC
FROM 256K byte, RAM 8K byte on-chip
16-bit 1-chip Microcontroller
Overview
The LC88F85D0A is a 16-bit microcomputer that, centered around an Xstormy16 CPU core, integrates on a single chip a
number of hardware features such as 256K bytes of flash ROM (onboard programmable), 8K bytes of RAM, five 16-bit
timers, a time base timer, a synchronous SIO interface with automatic transfer function, a single-master I2C/synchronous
SIO interface, two asynchronous SIO (UART) interfaces, a remote control receiver, LCD dedicated RAM, an LCD dot-
matrix driver, a 12-bit-resolution 8-channel AD converter, a watchdog timer, a system clock frequency divider, and a 35-
source 10-vector interrupt feature.
Features
Xstromy16 CPU
• 4G-byte address space
• General-purpose registers: 16 bits × 16
Flash ROM
• Onboard programmable with a wide range of supply voltages: 3.0 to 5.5V
• Block erasable in 512-byte/1K-byte units
• Data writing in 2-byte units
• 262144 × 8 bits
RAM
• Data: 8192 × 8 bits
• LCD display: 128 × 16 bits
* This product is licensed from Silicon Storage Technology, Inc. (USA), and manufactured and sold by
SANYO Semiconductor Co., Ltd.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
Ver.1.00
51111HKIM 20110412-S00003 No.A1954-1/31
|
| |
 
LC88F85D0A
Continued from preceding page.
• HOLD mode: Suspends instruction execution and the operation of the peripheral circuits.
1) OSC1, RC, and OSC0 oscillations automatically stop.
2) There are five ways of releasing the HOLD mode:
<1> Setting the reset pin to the low level
<2> Having an interrupt source established at port 0
<3> Having an interrupt source established at SIO0
<4> Having an interrupt source established at UART2
<5> Having an interrupt source established at SEGINT
• HOLDX mode: Suspends instruction execution and the operation of all the circuits except the peripheral circuits
running on OSC0.
1) OSC1 and RC oscillators automatically stop operation.
2) OSC0 retains the state established when the HOLDX mode is entered.
3) There are seven ways of releasing the HOLDX mode:
<1> Setting the reset pin to the low level
<2> Having an interrupt source established at port 0
<3> Having an interrupt source established at SIO0
<4> Having an interrupt source established at UART2
<5> Having an interrupt source established at SEGINT
<6> Having an interrupt source established in the base timer or RTC2 circuit
<7> Having an interrupt source established in the infrared remote control receiver circuit
On-chip debugger function
• Supports software debugging with the microcontroller mounted on the target board.
• Supports source line debugging, tracing, breakpoint manipulation, and realtime display.
• Single-wire communication
Operating temperature
• -20 to +75°C
Package form
• TQFP120 (14×14) (lead-free type)
Development tools
• On-chip debugger: EOCUIF1 + LC88F85D0A
Package Dimensions
unit : mm (typ)
3257A
16.0
14.0
120
1
0.4
(1.2)
0.15
0.125
SANYO : TQFP120(14X14)
No.A1954-5/31
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for LC88F85D0A electronic component. |
| Information | Total 30 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ LC88F85D0A.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| LC88F85D0A | The function is 16-bit 1-chip Microcontroller. ON Semiconductor |  |
| LC88F85D0A | The function is 16-bit 1-chip Microcontroller. Sanyo | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
LC88
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||