|
|
Número de pieza | SLC1049 | |
Descripción | Shielded Power Inductors | |
Fabricantes | Coilcraft | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SLC1049 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! Document 498-1
Shielded Power Inductors – SLC1049
±2L0 %2 (mDOChmR s)3 StyRpF4 Isat5 Irms6
Part number1 (µH) typ max (MHz) (A) (A)
SLC1049-750ML_ 0.075 0.230 0.246 200 61.0 43.0
SLC1049-101ML_ 0.100 0.230 0.246 145 50.0 43.0
SLC1049-121ML_ 0.125 0.230 0.246 140 37.0 43.0
SLC1049-151ML_ 0.150 0.230 0.246 133 30.0 43.0
SLC1049-231ML_ 0.230 0.230 0.246 70 25.5 43.0
0.271
6,88
max
0.401
10,20
max
Dash number
Internal code
0.203
5,16
max
0.118
3,00
Points used for measuring DCR
Recommended
Land Pattern
• Designed foruse in multi-phase VRM/VRD regulators and high
current/high frequency DC/DC converters.
• Requires only 70 mm2 of board space; can handle up to 61 A.
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant matte tin over nickel over copper.
Other terminations available at additional cost.
Weight 1.25 – 1.30 g
Ambient temperature –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 250/7″ reel; 1000/13″ reel Plastic tape: 24 mm wide,
0.35 mm thick, 12 mm pocket spacing, 5.08 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
1. When ordering, please specify termination and packaging codes:
SLC1049-151MLC
Termination: L = RoHS compliant matte tin over nickel over copper.
Special order: T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (250 per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (1000 per full reel). Factory order only, not
stocked.
2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4263B
LCR meter or equivalent.
3. DCR is measured on a micro-ohmmeter at points indicated in the
dimensional diagram.
4. SRF measured with coils connected in series using an Agilent/HP
8753ES network analyzer or equivalent.
5. DC current at 25°C that causes a 20% (typ) inductance drop from its
value without current. Click for temperature derating information.
6. Current that causes a 40°C temperature rise from 25°C ambient. This
information is for reference only and does not represent absolute
maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.100
2,54
min
Dimensions
are
in
inches
mm
0.311
7,90
0.148
3,76
0.130
3,30
Document 498-1 Revised 09/15/15
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet SLC1049.PDF ] |
Número de pieza | Descripción | Fabricantes |
SLC1049 | Shielded Power Inductors | Coilcraft |
SLC1049-101ML | Shielded Power Inductors | Coilcraft |
SLC1049-121ML | Shielded Power Inductors | Coilcraft |
SLC1049-151ML | Shielded Power Inductors | Coilcraft |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |