|
|
Numéro de référence | SLC7530 | ||
Description | Shielded Power Inductors | ||
Fabricant | Coilcraft | ||
Logo | |||
1 Page
Document 366-1
Shielded Power Inductors – SLC7530
• Designed for high-speed switch mode applications
• Can be used as a 1:1 transformer or in SEPIC applications
Designer’s Kit C379 contains 3 each of all values.
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant matte tin over nickel over copper.
Other terminations available at additional cost.
Weight: 0.44 – 0.47 g
Ambient temperature –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 500/7″ reel; 1700/13″ reel; Plastic tape: 16 mm wide,
0.33 mm thick, 12 mm pocket spacing, 3.12 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Single Conductor
L±20%2 DCR ±5%3 SRF typ4 Isat5 Irms6
Part number1 (µH) (mOhms) (GHz) (A) (A)
SLC7530S-500ML_ 0.050 0.123 3.80 50 40
SLC7530S-640ML_ 0.064 0.123 3.65 32 40
SLC7530S-820ML_ 0.082 0.123 3.75 22 40
SLC7530S-101ML_ 0.100 0.123 3.75 20 40
Dual Conductor
Leads connected in parallel
L±20%2 DCR ±5%3 SRF typ4 Isat5 Irms6
Part number1
(µH) (mOhms) (GHz) (A) (A)
SLC7530D-500ML_ 0.050 0.209 3.75 50 38
SLC7530D-640ML_ 0.064 0.209 3.65 32 38
SLC7530D-820ML_ 0.082 0.209 3.75 22 38
SLC7530D-101ML_ 0.100 0.209 3.75 20 38
Leads connected in series
L±20%2 DCR max3 SRF typ4 Isat5 Irms6
(µH) (mOhms) (GHz) (A) (A)
0.188 1.00
0.272 1.00
0.350 1.00
0.400 1.00
1.50 21 17
1.30 14 17
1.20 11 17
0.950 8 17
1. When ordering, please specify termination and packaging codes:
SLC7530S-101MLC
Termination: L = RoHS compliant matte tin over nickel over copper
Special order: T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (500 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (1700 parts per
full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4263B LCR
meter or equivalent.
3. DCR is measured on a micro-ohmmeter at points indicated in the diagram.
Points used for measuring DCR
4. SRF measured using an Agilent/HP 8753ES network analyzer and a
Coilcraft SMD-D fixture.
5. DC current at 25°C that causes a 20% (typ) inductance drop from its
value without current. Click for temperature derating information.
6. Current that causes a 40°C temperature rise from 25°C ambient. This
information is for reference only and does not represent absolute maxi-
mum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 366-1 Revised 09/15/15
|
|||
Pages | Pages 3 | ||
Télécharger | [ SLC7530 ] |
No | Description détaillée | Fabricant |
SLC7530 | Shielded Power Inductors | Coilcraft |
SLC7530D-101ML | Shielded Power Inductors | Coilcraft |
SLC7530D-500ML | Shielded Power Inductors | Coilcraft |
SLC7530D-640ML | Shielded Power Inductors | Coilcraft |
US18650VTC5A | Lithium-Ion Battery | Sony |
TSPC106 | PCI Bus Bridge Memory Controller | ATMEL |
TP9380 | NPN SILICON RF POWER TRANSISTOR | Advanced Semiconductor |
www.DataSheetWiki.com | 2020 | Contactez-nous | Recherche |