DataSheetWiki


XFL2005 fiches techniques PDF

Coilcraft - Shielded Power Inductors

Numéro de référence XFL2005
Description Shielded Power Inductors
Fabricant Coilcraft 
Logo Coilcraft 





1 Page

No Preview Available !





XFL2005 fiche technique
Document 779-1
Shielded PowerInductors–XFL2005
• Lowest profile, ultra-miniature, magnetically shielded power
inductor; only 0.5 mm high, 2 mm × 2 mm footprint
• Soft saturation
Designer’s Kit C434 contains 5 of each value and 5 of each XFL2006
Core material Composite
Core and winding loss  See www.coilcraft.com/coreloss
Environmental  RoHS compliant, halogen free
Terminations  RoHS compliant tin-silver-copper (96.5/3/0.5) over tin
over nickel over silver-platinum. Other terminations available.
Weight  8.4 mg
Ambient temperature  –40°C to +855°C with (40°C rise) Irms current.
Maximum part temperature  +125°C (ambient + temp rise). Derating.
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°CResistance to soldering
heat  Max three 40 second reflows at +260°C, parts cooled to room
temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  2000/7reel; 7500/13reel  Plastic tape:  8 mm wide,
0.28 mm thick, 4 mm pocket spacing, 0.76 mm pocket depth
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Part number1
Inductance2
±20% (µH)
XFL2005-151ME_ 0.15
XFL2005-221ME_ 0.22
XFL2005-331ME_ 0.33
XFL2005-471ME_ 0.47
XFL2005-681ME_ 0.68
 DCR (Ohms)3
nom     max
 SRF typ4
 Isat (A)5  Irms (A)6
(MHz) 10% drop 20% drop 30% drop 20°C rise  40°C rise
0.085 0.098
0.111 0.128
0.144 0.166
0.177 0.204
0.215 0.247
590
480
380
275
220
1.05 1.55 1.90 1.25 1.60
0.72 1.20 1.50 1.13 1.48
0.65 1.05 1.30 1.00 1.30
0.60 0.97 1.20 0.95 1.25
0.50 0.75 0.95 0.80 1.05
1. When ordering, please specify termination and packaging codes:
XFL2005-471MEC
Termination: E = RoHS compliant tin-silver-copper (96.5/3/0.5) over
tin over nickel over silver-platinum.
Special order:
S = non-RoHS tin-lead (63/37).
Packaging: C = 7machine-ready reel. EIA-481 embossed plastic
tape 2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D = 13machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked 7500 parts per
full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes the specified inductance drop from its
value without current. Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient.
This information is for reference only and does not represent absolute
maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.079 ±0.008
2,0 ±0,2
0.075 ±0.008
1,9 ±0,2
0.020
0,50
max
0.014
0,35
min
0.035
0,90
typ
0.065
1,65
0.018
0,45
0.087
2,2
0.057
1,45
0.041
1,04
Recommended
Land Pattern
Dimensions are in
inches
mm
Document 779-1  Revised 09/01/15

PagesPages 2
Télécharger [ XFL2005 ]


Fiche technique recommandé

No Description détaillée Fabricant
XFL2005 Shielded Power Inductors Coilcraft
Coilcraft
XFL2005-151ME Shielded Power Inductors Coilcraft
Coilcraft
XFL2005-221ME Shielded Power Inductors Coilcraft
Coilcraft
XFL2005-331ME Shielded Power Inductors Coilcraft
Coilcraft

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche