DataSheetWiki


CM10-2289 fiches techniques PDF

Clare Inc. - Molded Mini-DYAD

Numéro de référence CM10-2289
Description Molded Mini-DYAD
Fabricant Clare Inc. 
Logo Clare  Inc. 





1 Page

No Preview Available !





CM10-2289 fiche technique
Molded Mini-DYAD
CM10
Features
Small size
SMT-compatible
Easily formed leads
Sputtered ruthenium contacts
Hermetically sealed contacts
Fast switching speed — up to 500Hz
Wide range of available magnetic sensitivities
Superior mechanical strength
Enhanced for better auto placement
Applications
Security
Proximity sensing
Smoke alarms
Automotive
Level sensor
Lamp current sensor
Relays
Standard Test Coil
The magnetic force (expressed in NI, AT or Ampere Turns) required to cause the reed switch contacts to
close is called the pull-in or operate value.
CM10
Part #
Coil definition
Coil resistance
Number of turns
Wire size (nom. diameter)
Bobbin diameter (inside coil)
Winding length
Coil - 1
NARM1 CTC01
1200
5,000
0.0399mm (AWG 46)
3.96mm
10.4mm
(1) Consult factory for test procedure.
The reed switch shall be placed in the test coil with the gap centered in the core of the coil winding.
Test leads and their clips must be non-magnetic.
The longitudinal axis of the test coil and the test switch shall be vertical.
Description
Clare's Molded Mini DYAD dry reed switches are ideally
suited for small switching signal applications. This switch
has sputtered tuthenium contacts and an extraordinary
seal strength, achieved by a patented laser sealing of the
glass. In a low level or dry switching environments, both
switches typically provide >1 billion operations. The
switches have hermetically sealed contacts and offer a
wide range of available magnetic sensitivities. In addition,
the molding process provides a solid plastic outer shell.
This plastic shell provides superior mechanical strength,
eliminates concerns over handling glass switches, and
provides an ideal solution for high speed, automated
assembly environments.
Ordering Information
A complete part number is represented by the digits to the
right. For example, CM10S2030 is a MOLDED MINI-
DYAD™ with a minimum operate value of 10NI and a
maximum of 30NI. Refer to the switch operating specifica-
tion charts for available ranges. Special ranges are available
upon request.
CM10 S XX XX
"S" for straight switch
blank for SMT
Maximum
operate value
Minimum
operate value
Surface Mount Molded Mini-DYAD
Refer to operating characteristics table for complete part number.
Molded Mini-DYADTM
Part #
Operate Range (NI)1
CM10S1015
CM10S1020
CM10S1030
CM10S1520
CM10S1525
CM10S2025
10 to 15
10 to 20
10 to 30
15 to 20
15 to 25
20 to 25
Molded Mini-DYADTM Surface Mount
Part #
Operate Range (NI)1,2,3
CM10-2308
CM10-2288
CM10-2339
CM10-2285
CM10-2289
CM10-2286
10 to 15
10 to 20
10 to 30
15 to 20
15 to 25
20 to 25
1 Tolerance = ± 1.5NI
2 Full Blade Sensitivity
3 Surface Mount Switches are packaged 3,000 parts per reel
DS-CM10-R1
www.clare.com
1

PagesPages 4
Télécharger [ CM10-2289 ]


Fiche technique recommandé

No Description détaillée Fabricant
CM10-2285 Molded Mini-DYAD Clare  Inc.
Clare Inc.
CM10-2286 Molded Mini-DYAD Clare  Inc.
Clare Inc.
CM10-2288 Molded Mini-DYAD Clare  Inc.
Clare Inc.
CM10-2289 Molded Mini-DYAD Clare  Inc.
Clare Inc.

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche