|
|
Número de pieza | BTM222B-A | |
Descripción | Bluetooth radio | |
Fabricantes | Hyper Taiwan Technology | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de BTM222B-A (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
No Preview Available ! BTM222B-X Datasheet
BTM222B-A Datasheet
BTM222B-AC Datasheet
BTM222B-AC-KIT
Datasheet
The BTM-222B-X is a small form factor, low power, simple to
integrate Bluetooth radio for OEMs adding wireless capability
BTM-222B-X to their products. The is perfect for battery
powered applications and by default is ready to use in the
SPP (Serial Port Profile) configuration. It uses only 250 uA in
sleep mode while still being discoverable and connectable.
Multiple low power modes available allow you to dial in the
lowest power profile for your application. The BTM-222B-X
supports multiple Bluetooth profiles, is fully certified, and is
simple to design in, making it a complete embedded
Bluetooth solution. With its high performance on-chip
antenna and support for Bluetooth Enhanced Data Rate
(EDR), the BTM-222B-X delivers up to 3 Mbps data rate for
distances to 100 meters. The BTM-222B-X is the perfect
product for engineers adding Bluetooth capability to their
product without spending significant time and money to
develop Bluetooth specific hardware and software.
The BTM-222B-X can be configured in different modes:
HCI Mode: In this mode the Bluetooth stack is running on an external processor (not on BTM-222)
There are two possible hardware interface options:
UART: This is called HCI over H4. The external processor running the stack is interfaced to the BTM-222B-X using the UART
interface. The baud rate at which the BTM-222B-X talks to the processor is fixed and needs to be programmed (in the BTM-
222) during the firmware flash process. Customers need to specify this while ordering.
USB:In this mode, the BTM-222B-X is interfaced to the external processor using a USB interface. The BTM-222B-X acts as a
USB slave (not a USB host). The key advantage of HCI mode is that it allows customers to run custom profiles on their
processor. It also provides fast data rates (up to 3 Mbps).
Application
• Access point
• Domestics and Industrial applications
• Personal Digital Assistants(PDA)
• Serial Adapter
• GPS, POS, Barcode Reader
• Digital camera, Printer& Cellular phone
• Cordless handset
1 page 5 Page 11 Page |
Páginas | Total 16 Páginas | |
PDF Descargar | [ Datasheet BTM222B-A.PDF ] |
Número de pieza | Descripción | Fabricantes |
BTM222B-A | Bluetooth radio | Hyper Taiwan Technology |
BTM222B-AC | Bluetooth radio | Hyper Taiwan Technology |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |