BD00HC5WEFJ Datasheet PDF - ROHM Semiconductor
| Part Number | BD00HC5WEFJ | |
| Description | 1.5A Secondary Variable Output LDO Regulators | |
| Manufacturers | ROHM Semiconductor | |
| Logo |  |
|
|
There is a preview and BD00HC5WEFJ download ( pdf file ) link at the bottom of this page. Total 12 Pages | ||
Preview 1 page No Preview Available !
Secondary Variable Output LDO Regulator Series for Local Power Supplies
1.5A Secondary Variable Output
LDO Regulators for Local Power Supplies
BD00HC5WEFJ
No.10026EAT09
●Description
BD00HC5WEFJ is a LDO regulator with output current 1.5A. The output accuracy is ±1% of output voltage. With
external resistance, it is available to set the output voltage at random (from 1.5V to 7.0V) and also provides output
voltage fixed type without external resistance. It is used for the wide applications of digital appliances. It has package
type: HTSOP-J8. Over current protection (for protecting the IC destruction by output short circuit), circuit current
ON/OFF switch (for setting the circuit 0μA at shutdown mode), and thermal shutdown circuit (for protecting IC from heat
destruction by over load condition) are all built in. It is usable for ceramic capacitor and enables to improve smaller set
and long-life.
●Features
1) Output current 1.5A
2) High accuracy reference voltage circuit
3) Built-in Over Current Protection circuit (OCP)
4) Built-in Thermal Shut Down circuit (TSD)
5) With shut down switch
6) Output voltage variable type (1.5V to 7.0V)
7) Package: HTSOP-J8
●Output voltage differential Line up
Product name
BD00HC5WEFJ
Variable Package
○ HTSOP-J8
Product name : BD00HC5WEFJ
abc d e
Signal
a
b
c
d
e
Description
Output voltage (V)
00 Variable
Voltage resistance(V)
E 24V H 10V
F 20V
I
7V
G 15V
Output current (A)
A1 0.1A C0 1.0A
A3 0.3A C5 1.5A
A5 0.5A D0 2.0A
Shutdown switch
“W” Shutdown switch is built in
“ ” Shutdown switch is not built in
Package
EFJ HTSOP-J8
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
1/11
2010.04 - Rev.A
|
| |
 
BD00HC5WEFJ
Technical Note
●Heat Dissipation Characteristics
◎HTSOP-J8
Measure condition: mounted on a ROHM board, and IC
4.0 ⑤3.76W
3.0
Substrate size: 70mm × 70mm × 1.6mm
(Substrate with thermal via)
・Solder the substrate and package reverse exposure heat
radiation part
④2.11W
2.0
① IC only
θj-a=249.5℃/W
③1.10W
1.0 ②0.82W
①0.50W
② 1-layer（copper foil are :0mm×0mm）
θj-a=153.2℃/W
③ 2-layer（copper foil are :15mm×15mm）
0 θj-a=113.6℃/W
0
25 50 75 100
125 150 ④ 2-layer（copper foil are :70mm×70mm）
Ambien周t 囲Te温mp度e:rTaatu[r℃e ]:Ta [℃]
θj-a=59.2℃/W
⑤ 4-layer（copper foil are :70mm×70mm）
θj-a=33.3℃/W
●About Input-to-output capacitor
It is recommended that a capacitor is placed nearby pin between Input pin and GND, output pin and GND.
A capacitor, between input pin and GND, is valid when the power supply impedance is high or drawing is long. Also as for a
capacitor, between output pin and GND, the greater the capacity, more sustainable the line regulation and it makes improvement
of characteristics by load change. However, please check by mounted on a board for the actual application. Ceramic capacitor
usually has difference, thermal characteristics and series bias characteristics, and moreover capacity decreases gradually by
using conditions.
For more detail, please be sure to inquire the manufacturer, and select the best ceramic capacitor.
Ceramic capacitor capacity- DC bias characteristics
(Characteristics example)
10
0
-10
-20
-30
-40
-50
-60
-70
10 Voltage Resistance
F characteristics
10 Voltage resistance
B1 characteristics
GRM188B11A105KA61D
10 Voltage resistance
B characteristics
6.3 Voltage resistance
B characteristics
10 Voltage resistance
F characteristics
4 Voltage resistance
X6S characteristics
-80
-90
-100
0
123
DC Bias Voltage [V]
4
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
5/11
2010.04 - Rev.A
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for BD00HC5WEFJ electronic component. |
| Information | Total 12 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ BD00HC5WEFJ.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| BD00HC5WEFJ | The function is 1.5A Secondary Variable Output LDO Regulators. ROHM Semiconductor | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
BD00
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||