DataSheetWiki


KM15 fiches techniques PDF

Ashcroft - Pressure Transducer

Numéro de référence KM15
Description Pressure Transducer
Fabricant Ashcroft 
Logo Ashcroft 





1 Page

No Preview Available !





KM15 fiche technique
BULLETIN PT-15
Model KM15 Pressure Transducer
Upgraded replacement to KM10
LOOK FOR THIS
AGENCY MARK ON
OUR PRODUCTS
APPLICATIONS
An upgraded replacement to the
popular Type KM 10, the cost effective
construction of the KM15 is ideally
suited to address the demanding
pressure sensing needs of the original
equipment manufacturer in a multitude
of applications, including:
• Off-Road Equipment
• Construction Machinery
• HVAC/Refrigeration
• Compressor Control
• Pump Monitoring
• Agricultural Implements
• Diagnostic Kits
• Engine Monitoring
• Process Automation & Control
• Hydraulic & Pneumatic Sensing
• Machine Tool
• RoHS compliant
The Ashcroft® KM15 pressure trans-
ducer marries a proven polysilicon thin
film sensor to a high performance ASIC to
provide a highly accurate, stable and
durable transducer.
Calibration, by digital compensation, results
in an extremely linear and repeatable
instrument over a wide temperature range.
The highly stable thin film sensor of
17-4 PH stainless steel is electron beam
welded to one of a wide selection of
stainless steel pressure fittings to provide
superior media compatibility and over-
pressure capability.
PERFORMANCE SPECIFICATIONS
Ref. Condition 23°C ±2° (73°F)
Accuracy: Includes non-linearity, hysteresis, non-
repeatability, – BFSL (Best Fit Straight Line) method:
±0.5% Span, 100 psig F.S. and above
±1.0% Span, 75 psig F.S. and below
Stability: ±0.25% Span/year
Interchangeability: <0.5% Span
Durability: Tested to 10 million cycles (10 to 100%FS)
ENVIRONMENTAL SPECIFICATIONS
Temperature:
Storage
Operating
–40/120°C (–40/250°F)
–40/120°C (–40/250°F)
Compensated –30/120°C (–25/250°F)
Humidity: 0/100%R.H., no effect
Thermal Coefficients: –30 to 120°C (–25 to +250°F)
Zero Span
±0.0055%/°F (±0.01%/°C) ±0.0055%/°F(±0.01%/°C )
FUNCTIONAL SPECIFICATIONS
Ranges:
vac/0 psi* vac/300 psi* 0/500 psi
vac/15 psi* 0/15 psi* 0/750 psi
vac/30 psi* 0/30 psi* 0/1000 psi
vac/50 psi* 0/50 psi* 0/1500 psi
vac/75 psi* 0/75 psi* 0/2000 psi
vac/100 psi* 0/100 psi* 0/3000 psi
vac/150 psi* 0/200 psi* 0/5000 psi
vac/200 psi* 0/300 psi* 0/7500 psi
*Ranges in psig with vented cable or Metri-Pack
termination only
Overpressure (F.S.): Proof
Burst
750 psi & below 2 x range 10 x range
1500 psi
2 x range 5 x range
3000 psi
2 x range 5 x range
5000 psi
1.5 x range 5 x range
7500 psi
1.2 x range 5 x range
Vibration: Random to 1 KHz, 20 g’s
Shock: 50 g’s, 11 msec
Drop Test: No effect 1 meter drop on concrete
Response Time: Less than 1msec
Position Effect: Less than 0.01% F.S.
ELECTRICAL SPECIFICATIONS
Output Signal Options:
Supply
Output
Excitation
Current
0.5-4.5 Vdc 5 Vdc ± .5 Vdc 10mA typical
(ratiometric)
1-5 Vdc
8-32 Vdc 10mA typical
Reverse Polarity Protection: Yes
Insulation Breakdown Voltage:
(Circuit to case) 150 Vac/1 min. 500 Vac option
Insulation Resistance: (Circuit to Case)
100M ohm min.@50 Vdc.
Warm-up Time: <25 msec
CE Compliance:
Per EN 61326: 1997 Annex A: 1998 (A1), 2001 (A2),
2003 (A3)
PHYSICAL SPECIFICATIONS
Pressure Connection Options: see “To Order” below
Pressure Connection: 304 SS
Housing: 304 SS
Diaphragm Material: 17-4 PH SS
Electrical Termination: see “To Order” below
• Metri Pack 150 Series
• Shielded Cable
• Flying Leads
Protection Rating: IP67
Weight: Connector:Approx. 2 oz. (60g),
Cable:Approx. 3.88 oz. (110g)
OPTIONS
Custom mating harness, Special cleaning (for O2),
Non-standard pressure ranges, Alternate process
connections, Special calibration/accuracy, Throttle
screws,
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© Ashcroft Inc. 2010 07/14
Ashcroft Inc., 250 East Main Street, Stratford, CT 06614 USA
Tel: 203-378-8281 • Fax: 203-385-0408
email: [email protected] • www.ashcroft.com

PagesPages 2
Télécharger [ KM15 ]


Fiche technique recommandé

No Description détaillée Fabricant
KM10 Force Sensor ME-Mebsysteme
ME-Mebsysteme
KM1102 16 interpolation LSI KODENSHI
KODENSHI
KM110B Magnetic field sensor NXP Semiconductors
NXP Semiconductors
KM110BH 30 and 70 angle sensor hybrids NXP Semiconductors
NXP Semiconductors

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche