DataSheetWiki


LE24162LBXA fiches techniques PDF

Sanyo - Two Wire Serial Interface EEPROM

Numéro de référence LE24162LBXA
Description Two Wire Serial Interface EEPROM
Fabricant Sanyo 
Logo Sanyo 





1 Page

No Preview Available !





LE24162LBXA fiche technique
Ordering number : ENA2071
LE24162LBXA
CMOS IC
Two Wire Serial Interface
EEPROM (16k EEPROM)
Overview
The LE24162LBXA is a 2-wire serial interface EEPROM. It realizes high speed and a high level reliability by
incorporating SANYO’s high performance CMOS EEPROM technology. This device is compatible with I2C memory
protocol; therefore it is best suited for application that requires small-scale re-writable nonvolatile parameter memory.
Functions
Capacity: 16k bits (2k × 8 bits)
Single supply voltage: 1.7V to 3.6V (to read)
Operating temperature: -40 to +85ºC
Interface: Two wire serial interface (I2C Bus*)
Operating clock frequency: 400kHz
Low power consumption
: Standby: 2μA (max)
: Active (Read): 0.5mA (max)
Automatic page write mode: 16 Bytes
Read mode: Sequential read and random read
Erase/Write cycles: 105 cycles (Page write)
Data Retention: 20 years
High reliability: Adopts SANYO’s proprietary symmetric memory array configuration (USP6947325)
Noise filters connected to SCL and SDA pins
Incorporates a feature to prohibit write operations under low voltage conditions.
Package : WLFCP6(0.80 × 1.20)
* I2C Bus is a trademark of Philips Corporation.
* This product is licensed from Silicon Storage Technology, Inc. (USA), and manufactured and sold by
SANYO Semiconductor Co., Ltd.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system,
safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives
in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any
guarantee thereof. If you should intend to use our products for new introduction or other application different
from current conditions on the usage of automotive device, communication device, office equipment, industrial
equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the
intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely
responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
61312 SY 20120509-S00003 No.A2071-1/11

PagesPages 11
Télécharger [ LE24162LBXA ]


Fiche technique recommandé

No Description détaillée Fabricant
LE24162LBXA Two Wire Serial Interface EEPROM ON Semiconductor
ON Semiconductor
LE24162LBXA Two Wire Serial Interface EEPROM Sanyo
Sanyo

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche