DataSheetWiki


ACT8507 fiches techniques PDF

Aeroflex Circuit Technology - 64-Channel Analog Multiplexer Module

Numéro de référence ACT8507
Description 64-Channel Analog Multiplexer Module
Fabricant Aeroflex Circuit Technology 
Logo Aeroflex Circuit Technology 





1 Page

No Preview Available !





ACT8507 fiche technique
Standard Products
Datasheet
MUX8507 64-Channel Analog Multiplexer Module
Radiation Tolerant
www.aeroflex.com/mux
May 5, 2014
FEATURES
64-Channels provided by six 16-channel multiplexers- 32 Kelvin measurement configured channels
Radiation performance
- Total dose:
- SEU:
- SEL:
300 krads(Si), Dose rate = 50 - 300 rads(Si)/s
Immune up to 120 MeV-cm2/mg
Immune by process design
Full military temperature range
Low power consumption < 90mW
Two address buses (A0-3 & B0-3) and four enable lines afford flexible organization.
Fast access time 1500ns typical
Break-Before-Make switching
Same Form / Fit / Function as ACT8500 minus channel input transorbs
High analog input impedance (power on or off) ?
Designed for aerospace and high reliability space applications
Packaging – Hermetic ceramic
- 96 leads, 1.32"Sq x 0.20"Ht quad flat pack
- Typical Weight 15 grams
Aeroflex Plainview’s Radiation Hardness Assurance Plan is DLA Certified to MIL-PRF-38534, Appendix G.
GENERAL DESCRIPTION
Aeroflex’s MUX8507 is a radiation tolerant, 64 channel multiplexer MCM (multi-chip module).
The MUX8507 has been specifically designed to meet exposure to radiation environments. It is available in
a 96 lead High Temperature Co-Fired Ceramic (HTCC) Quad Flatpack (CQFP). It is guaranteed operational
from -55°C to +125°C. Available screened in accordance with MIL-PRF-38534, the MUX8507 is ideal for
demanding military and space applications.
ORGANIZATION AND APPLICATION
The MUX8507 consists of six 16 channel multiplexers arranged as shown in the Block Diagram. The
MUX8507 design is inherently radiation tolerant.
A SECTION
Thirty-two (32) Kelvin measurement channels addressable by bus A0~A3, in two 16 channel blocks, each
block enabled separately. Each block connects the addressed channel to two outputs, "Output" and
"Current". This technique enables selecting and reading a remote resistive sensor without the multiplexer
resistance being part of the measurement. For grounded sensors, this is done by passing current to the sensor
by means of the "Current" pin and reading the resultant voltage (proportional to the sensor resistance) at the
"Output" pin.
B SECTION
Thirty-two (32) channels addressable by bus B0~B3, in two 16 channel blocks, each block enabled
separately. Each block connects the addressed channel to one output. By paralleling the channel inputs and
enables, this section can be converted to act like one of the 16 channel blocks of the A section.
SCD8507 Rev C

PagesPages 9
Télécharger [ ACT8507 ]


Fiche technique recommandé

No Description détaillée Fabricant
ACT8500 64-Channel Analog Multiplexer Module Aeroflex Circuit Technology
Aeroflex Circuit Technology
ACT8501 64-Channel Analog Multiplexer Module Aeroflex Circuit Technology
Aeroflex Circuit Technology
ACT8502 48-Channel Analog Multiplexer Module Aeroflex Circuit Technology
Aeroflex Circuit Technology
ACT8503 48-Channel Analog Multiplexer Module Aeroflex Circuit Technology
Aeroflex Circuit Technology

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche