|
|
PDF MMA7361LT Data sheet ( Hoja de datos )
| Número de pieza | MMA7361LT | |
| Descripción | Three Axis Low-g Micromachined Accelerometer | |
| Fabricantes | Freescale Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MMA7361LT (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
Freescale Semiconductor
Technical Data
www.DataSheet4U.com
±1.5g, ±6g Three Axis Low-g
Micromachined Accelerometer
The MMA7361L is a low power, low profile capacitive micromachined
accelerometer featuring signal conditioning, a 1-pole low pass filter,
temperature compensation, self test, 0g-Detect which detects linear freefall,
and g-Select which allows for the selection between 2 sensitivities. Zero-g
offset and sensitivity are factory set and require no external devices. The
MMA7361L includes a Sleep Mode that makes it ideal for handheld battery
powered electronics.
Features
• 3mm x 5mm x 1.0mm LGA-14 Package
• Low Current Consumption: 400 μA
• Sleep Mode: 3 μA
• Low Voltage Operation: 2.2 V – 3.6 V
• High Sensitivity (800 mV/g @ 1.5g)
• Selectable Sensitivity (±1.5g, ±6g)
• Fast Turn On Time (0.5 ms Enable Response Time)
• Self Test for Freefall Detect Diagnosis
• 0g-Detect for Freefall Protection
• Signal Conditioning with Low Pass Filter
• Robust Design, High Shocks Survivability
• RoHS Compliant
• Environmentally Preferred Product
• Low Cost
Typical Applications
• 3D Gaming: Tilt and Motion Sensing, Event Recorder
• HDD MP3 Player: Freefall Detection
• Laptop PC: Freefall Detection, Anti-Theft
• Cell Phone: Image Stability, Text Scroll, Motion Dialing, E-Compass
• Pedometer: Motion Sensing
• PDA: Text Scroll
• Navigation and Dead Reckoning: E-Compass Tilt Compensation
• Robotics: Motion Sensing
Part Number
MMA7361LT
MMA7361LR1
MMA7361LR2
ORDERING INFORMATION
Temperature
Range
Package
Drawing
Package
Shipping
–40 to +85°C
1977-01
LGA-14
Tray
–40 to +85°C
1977-01
LGA-14 7” Tape & Reel
–40 to +85°C
1977-01
LGA-14 13” Tape & Reel
Document Number: MMA7361L
Rev 0, 04/2008
MMA7361L
MMA7361L: XYZ AXIS
ACCELEROMETER
±1.5g, ±6g
Bottom View
14 LEAD
LGA
CASE 1977-01
Top View
N/C
N/C
XOUT
YOUT
ZOUT
VSS
VDD
Self Test
N/C
N/C
g-Select
0g-Detect
N/C
Sleep
Figure 1. Pin Connections
© Freescale Semiconductor, Inc., 2008. All rights reserved.
1 page  
www.DataSheet4U.com
Pin Descriptions
BASIC CONNECTIONS
PCB Layout
Top View
POWER SUPPLY
N/C
N/C
XOUT
YOUT
ZOUT
VSS
VDD
Self Test
N/C
N/C
g-Select
0g-Detect
N/C
Sleep
Figure 4. Pinout Description
Table 4. Pin Descriptions
Pin No. Pin Name
Description
VDD
VSS
Sleep
g-Select
0g-Detect
Self Test
XOUT
C
YOUT
ZOUT
C VRH
P0
P1
P2
P3
C A/DIN
A/DIN
C
C A/DIN
VDD
C
VSS
1 N/C No internal connection
Leave unconnected
2
XOUT
X direction output voltage
3
YOUT
Y direction output voltage
4
ZOUT
Z direction output voltage
5 VSS Power Supply Ground
6 VDD Power Supply Input
7 Sleep Logic input pin to enable product or Sleep Mode
8 NC No internal connection
Leave unconnected
9 0g-Detect Linear Freefall digital logic output signal
10 g-Select Logic input pin to select g level
11 N/C Unused for factory trim
Leave unconnected
12 N/C Unused for factory trim
Leave unconnected
13 Self Test Input pin to initiate Self Test
14 N/C Unused for factory trim
Leave unconnected
Logic
Input
Logic
VDD Input
0.1 μF
10 9
g-Select 0g-Detect
13
Self Test
2
XOUT
MMA7361L
3.3 nF
6 VDD
3
YOUT
5
VSS
3.3 nF
Figure 6. Recommended PCB Layout for Interfacing
Accelerometer to Microcontroller
NOTES:
1. Use 0.1 µF capacitor on VDD to decouple the power
source.
2. Physical coupling distance of the accelerometer to
the microcontroller should be minimal.
3. Place a ground plane beneath the accelerometer to
reduce noise, the ground plane should be attached to
all of the open ended terminals shown in Figure 6.
4. Use a 3.3nF capacitor on the outputs of the
accelerometer to minimize clock noise (from the
switched capacitor filter circuit).
5. PCB layout of power and ground should not couple
power supply noise.
6. Accelerometer and microcontroller should not be a
high current path.
7. A/D sampling rate and any external power supply
switching frequency should be selected such that
they do not interfere with the internal accelerometer
sampling frequency (11 kHz for the sampling
frequency). This will prevent aliasing errors.
8. 10MΩ or higher is recommended on XOUT, YOUT and
ZOUT to prevent loss due to the voltage divider
relationship between the internal 32 kΩ resistor and
the measurement input impedance.
Logic
Input
7
Sleep
4
ZOUT
3.3 nF
Figure 5. Accelerometer with Recommended
Connection Diagram
Sensors
Freescale Semiconductor
MMA7361L
5
5 Page 
www.DataSheet4U.com
How to Reach Us:
Home Page:
www.freescale.com
Web Support:
http://www.freescale.com/support
USA/Europe or Locations Not Listed:
Freescale Semiconductor, Inc.
Technical Information Center, EL516
2100 East Elliot Road
Tempe, Arizona 85284
+1-800-521-6274 or +1-480-768-2130
www.freescale.com/support
Europe, Middle East, and Africa:
Freescale Halbleiter Deutschland GmbH
Technical Information Center
Schatzbogen 7
81829 Muenchen, Germany
+44 1296 380 456 (English)
+46 8 52200080 (English)
+49 89 92103 559 (German)
+33 1 69 35 48 48 (French)
www.freescale.com/support
Japan:
Freescale Semiconductor Japan Ltd.
Headquarters
ARCO Tower 15F
1-8-1, Shimo-Meguro, Meguro-ku,
Tokyo 153-0064
Japan
0120 191014 or +81 3 5437 9125
Asia/Pacific:
Freescale Semiconductor Hong Kong Ltd.
Technical Information Center
2 Dai King Street
Tai Po Industrial Estate
Tai Po, N.T., Hong Kong
+800 2666 8080
For Literature Requests Only:
Freescale Semiconductor Literature Distribution Center
P.O. Box 5405
Denver, Colorado 80217
1-800-441-2447 or 303-675-2140
Fax: 303-675-2150
Information in this document is provided solely to enable system and software
implementers to use Freescale Semiconductor products. There are no express or
implied copyright licenses granted hereunder to design or fabricate any integrated
circuits or integrated circuits based on the information in this document.
Freescale Semiconductor reserves the right to make changes without further notice to
any products herein. Freescale Semiconductor makes no warranty, representation or
guarantee regarding the suitability of its products for any particular purpose, nor does
Freescale Semiconductor assume any liability arising out of the application or use of any
product or circuit, and specifically disclaims any and all liability, including without
limitation consequential or incidental damages. “Typical” parameters that may be
provided in Freescale Semiconductor data sheets and/or specifications can and do vary
in different applications and actual performance may vary over time. All operating
parameters, including “Typicals”, must be validated for each customer application by
customer’s technical experts. Freescale Semiconductor does not convey any license
under its patent rights nor the rights of others. Freescale Semiconductor products are
not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life,
or for any other application in which the failure of the Freescale Semiconductor product
could create a situation where personal injury or death may occur. Should Buyer
purchase or use Freescale Semiconductor products for any such unintended or
unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all
claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such
unintended or unauthorized use, even if such claim alleges that Freescale
Semiconductor was negligent regarding the design or manufacture of the part.
Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc.
All other product or service names are the property of their respective owners.
© Freescale Semiconductor, Inc. 2008. All rights reserved.
MMA7361L
Rev. 0
04/2008
RoHS-compliant and/or Pb-free versions of Freescale products have the functionality and electrical
characteristics of their non-RoHS-compliant and/or non-Pb-free counterparts. For further
information, see http:/www.freescale.com or contact your Freescale sales representative.
For information on Freescale’s Environmental Products program, go to http://www.freescale.com/epp.
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet MMA7361LT.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MMA7361L | Three Axis Low-g Micromachined Accelerometer | Freescale Semiconductor |
| MMA7361LC | Three Axis Low-g Micromachined Accelerometer | Freescale Semiconductor |
| MMA7361LCR1 | Three Axis Low-g Micromachined Accelerometer | Freescale Semiconductor |
| MMA7361LCR2 | Three Axis Low-g Micromachined Accelerometer | Freescale Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |