|
|
PDF SX8653 Data sheet ( Hoja de datos )
| Número de pieza | SX8653 | |
| Descripción | Multitouch 15kV ESD protection 4-Wire / 5-Wire Resistive Touchscreen Controller | |
| Fabricantes | Semtech | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SX8653 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
-----4
GENERAL DESCRIPTION
KEY PRODUCT FEATURES
The SX8653 is a touch controller for 4 or 5 wire resistive
touchscreen. With 4-wire touchscreen, the multitouch
feature enables a completely different user interaction. It
enables detection of 2 fingers on the touchscreen and
several gestures like rotation and pinch/ stretch.
It features a wide input supply range from 1.65V to 3.7V and
low power modes to preserve current when the screen is
unintentionally touched.
To compute touch screen X-Y coordinates and touch
pressure with precision, a low power 12-bit analog-digital
converter is activated with the possibility to enable on-chip
data averaging processing algorithms to reduce host activity
and suppress system noise.
The touch screen controller inputs have been specially
designed to provide robust on-chip ESD protection of up to
±15kV in both HBM and Contact Discharge, and eliminates
the need for external protection devices. The SX8653 is
controlled by a high speed SPI™ serial interface.
The SX8653 is available in a 4.0 mm x 3.0 mm 14-DFN
package and a 1.5 mm x 2.0 mm wafer level chip scale
package (WLCSP) for space conscience applications.
APPLICATIONS
Extremely Low Power Consumption: [email protected] 8kSPS
Support Multi-touch operation (4-wire)
Superior On-chip ESD Protection
±15kV HBM (X+,X-,Y+,Y-)
±2kV CDM
±25kV Air Gap Discharge
±15kV Contact Discharge
±300V MM
Pin-compatible with SX8652
Single 1.65V to 3.7V Supply/Reference
4-Wire or 5-Wire Resistive Touch Screen Interface
Integrated Preprocessing Block to Reduce Host Loading
and Bus Activity
Four User Programmable Operation Modes provides
Flexibility to address Different Application Needs
Manual, Automatic, Pen Detect, Pen Trigger
Precision, Low Noise, High Speed 12-bit SAR ADC
Operating At 74k SPS
Throughput: 5000 (X-Y) coordinates/second (c/s) with 7-
Sample Averaging
Low Power Shut-Down Mode < 1uA
DSC, DVR, Cell Phones
PDA, Pagers
Point-of-Sales Terminals
Touch-Screen Monitors
ORDERING INFORMATION
SPI™ Serial Interface
Touch Pressure Measurement (4-Wire)
Auxiliary Input (4-Wire) For Alternate ADC Input or Start
of Conversion Trigger
Hardware & Software reset
-40°C to +85°C operation
Part Number
SX8653ICSTRT1
SX8653IWLTRT1
1. 3000 Units / reel
Package (Dimension in mm) Marking
12 - Ball WLCSP (1.5x2.0) NB2A
14 - Lead DFN (4.0x 3.0) NB2A
VDD
Pb-Free, Halogen Free, RoHS/WEEE compliant product
Windows CE 6.0, Linux Driver Support Available
Packages: 14-LD (4.0 mm x 3.0 mm) DFN
12-Ball (1.5 mm x 2.0 mm) WLCSP
SX8653
VDD
Control
NIRQ
To the
touch
screen
AUX/W IPER
X+/BR
Y+/TR
X-/TL
Y-/BL
Touch
Screen
Interface
Vref
POR
OSC
ref+
in ADC out
ref-
SPI
D igital
Filter
NRST (DFN only)
NCS
SCLK
DOUT
DIN
To the
Host
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 1
GND
www.semtech.com
1 page  
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
1.3. Pin Description
Pin Number Name
#
Type
Description
DFN WLCSP
1 A1 AUX/WIPER Digital Input /
Analog Input
Conversion Synchronization (4-wire) or
Analog Auxiliary Input (4-wire) / Wiper Input (5-wire)
2 A2 VDD
Power Input
Input power supply, connect to a 0.1uF capacitor to GND
3 A3 X+/BR
Analog IO
X+ Right electrode (4-wire) / Bottom Right (5-wire) channel
4 B3 Y+/TR
Analog IO
Y+ Top electrode (4-wire) /Top Right (5-wire) channel
5 C3 X-/TL
Analog IO
X- Left electrode (4-wire) /Top Left (5-wire) channel
6 D3 Y-/BL
Analog IO
Y- Bottom electrode (4-wire) /Bottom Left (5-wire) channel
7 D2 GND
Ground
Ground
8 D1 SCLK
Digital Input
SPI Serial Clock Input
9 C2 DIN
Digital Output
SPI Serial Data Input
10 C1 DOUT
Digital Output
SPI Serial Data Output
11 B1 NIRQ
Digital Output, open drain Interrupt Request Output, Active low, Need external pull-up
12 B2 NCS
Digital Input
SPI Chip Select Input, Active low
13 - NRST
Digital Input
DFN package only, Reset Input, Active low, Internal pull-up resistor
14 - (NC)
Not Connected
15 - GND
Power input
Backside Ground
Table 1. Pin description
1.4. Simplified Block Diagram
The SX8653 simplified block diagram is shown in Figure 3.
SX8653
VDD
VDD
Control
NIRQ
To the
touch
screen
AUX/WIPER
X+/BR
Y+/TR
X-/TL
Y-/BL
Touch
Screen
Interface
Vref
POR
OSC
ref+
in ADC out
ref-
SPI
Digital
Filter
NRST (DFN only)
NCS
SCLK
DOUT
DIN
To the
Host
GND
Figure 3. Simplified block diagram of the SX8653
Revision V1.0/October 2010
©2010 Semtech Corp.
Page 5
www.semtech.com
5 Page 
SX8653
Multitouch 15kV ESD protection 4-Wire / 5-Wire
Resistive Touchscreen Controller with SPI Interface
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
3.2. Device Interface and ESD protection
The touch screen controller inputs have been specially designed to provide robust on-chip ESD protection of up to ±15kV
in both HBM and Contact Discharge.
3.2.1. Touchscreen interface
The X+/BR, X-/TL, Y+/TR,Y-/BL, AUX/WIPER are the pins dedicated for the touchscreen interface. It provides the voltage
sequence in order to obtain the coordinates and pressure measurement.
The five pins are connected to BR, TL, TR, BL, WIPER on a 5-wire touchscreen. They are the electrodes on the 4 corners
of the bottom layer of the touchscreen plus the electrode on the top layer.
On a 4-wire touchscreen, only 4 electrodes are used: X+,X-,Y+,Y-. The AUX pin is not needed and therefore can be used
to convert an analog signal (range GND - VDD) into 12-bit digital value. The touchscreen interface pins are the most
exposed pins for an ESD event.
As shown in Figure 7, theses pins have internal ESD protection to GROUND and VDD.
3.2.2. Host Interface and Control Pins
The SX8653 is a slave device configured via the SPI interface. DIN and SCLK have internal ESD protection to GROUND
and VDD.
NIRQ provides an interrupt to the host processor when a pen is detected or when channel data is available. The NIRQ pin
is an active low, open drain output to facilitate interfacing to different supply voltages and thus requires an external pull-up
resistor (1-10 kOhm).
The host can reset the chip via the SPI interface or with the dedicated pin NRST. The NRST pin is an active low input with
an internal pull-up that provides a hardware reset.
NRST and NIRQ pins are protected to GROUND.
X + /B R
X -/T L
Y + /T R
Y -/B L
AUX/
W ip e r
R chn
R chn
R chn
R chn
SPI
Touch
S creen
D rive rs
In te rfa c e
MUX
A
D
C
Power
M anagem ent
C o n tro l
D a ta P ro c e s s in g
VDD
GND
NRST
N IR Q
Revision V1.0/October 2010
©2010 Semtech Corp.
Figure 7. ESD protection
Page 11
www.semtech.com
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet SX8653.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SX8650 | Worlds Lowest Power & Smallest Footprint 4-wire Resistive Touchscreen Controller | Semtech |
| SX8651 | Multitouch 4-wire Resistive Touchscreen Controller | Semtech |
| SX8652 | 15kV ESD Low Power 4-Wire / 5-Wire Resistive Touchscreen Controller | Semtech |
| SX8653 | Multitouch 15kV ESD protection 4-Wire / 5-Wire Resistive Touchscreen Controller | Semtech |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |