|
|
PDF AUIRG4PH50S Data sheet ( Hoja de datos )
| Número de pieza | AUIRG4PH50S | |
| Descripción | Standard Speed IGBT | |
| Fabricantes | International Rectifier | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AUIRG4PH50S (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
AUTOMOTIVE GRADE
PD -96301
AUIRG4PH50S
Standard Speed IGBT
INSULATED GATE BIPOLAR TRANSISTOR
Features
Standard: Optimized for minimum saturation
voltage and low operating frequencies (< 1kHz)
Generation 4 IGBT design provides tighter
parameter distribution and higher efficiency
Industry standard TO-247AC package
Lead-Free
Automotive Qualified *
C
G
E
n-channel
C
VCES =1200V
VCE(on) typ. = 1.47V
@VGE = 15V, IC = 33A
Benefits
Generation 4 IGBT's offer highest efficiency available
IGBT's optimized for specified application conditions
E
C
G
TO-247AC
GC
E
Gate
Collector
Emitter
Absolute Maximum Ratings
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These
are stress ratings only; and functional operation of the device at these or any other condition beyond those indicated in
the specifications is not implied.Exposure to absolute-maximum-rated conditions for extended periods may affect device
reliability. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions.
Ambient temperature (TA) is 25°C, unless otherwise specified.
Parameter
Max.
Units
VCES
IC@ TC = 25°C
IC@ TC = 100°C
ICM
ILM
VGE
EARV
PD @ TC =25°
PD @ TC =100°
TJ
TSTG
Collector-to-Emitter Voltage
Continuous Collector Current
Continuous Collector Current
cPulsed Collector Current
dClamped Inductive Load Current
Gate-to-Emitter Voltage
eTransient Gate-to-Emitter Voltage
Reverse Voltage Avalanche Energy
Maximum Power Dissipation
Maximum Power Dissipation
Operating Junction and
Storage Temperature Range
Soldering Temperature, for 10 sec.
1200
57
33
114
114
± 20
± 30
270
200
80
-55 to + 150
300 (0.063 in. (1.6mm) from case)
V
A
V
mJ
W
°C
Mounting Torque, 6-32 or M3 Screw.
10 lbf·in (1.1 N·m)
Thermal Resistance
Parameter
RθJC
RθCS
RθJA
Wt
Junction-to-Case
Case-to-Sink, Flat, Greased Surface
Junction-to-Ambient, typical socket mount
Weight
Min.
—
—
—
—
Typ.
—
0.24
—
6.0(0.21)
Max.
0.64
—
40
—
Units
°C/W
g (oz)
www.irf.com
1
04/13/10
1 page  
60
50
40
30
20
10
0
25
50 75 100 125
TC , Case Temperature ( °C)
150
AUIRG4PH50S
2.5 VGE = 15V
80 us PULSE WIDTH
2.0
IC = 66 A
IC = 33 A
1.5
IC =16.5 A
1.0
-60 -40 -20 0 20 40 60 80 100 120 140 160
TJ , Junction Temperature ( °C)
Fig. 4 - Maximum Collector Current vs. Case
Temperature
Fig. 5 - Typical Collector-to-Emitter Voltage
vs. Junction Temperature
1
0.50
0.20
0.1
0.10
0.05
0.02
0.01
0.01
0.001
0.00001
SINGLE PULSE
(THERMAL RESPONSE)
PDM
t1
t2
Notes:
1. Duty factor D = t1 / t2
2. Peak TJ = PDM x Z thJC + TC
0.0001
0.001
0.01
t1 , Rectangular Pulse Duration (sec)
0.1
1
Fig. 6 - Maximum Effective Transient Thermal Impedance, Junction-to-Case
www.irf.com
5
5 Page 
IMPORTANTNOTICE
AUIRG4PH50S
Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries
(IR) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to
its products and services at any time and to discontinue any product or services without notice. Part numbers
designated with the “AU” prefix follow automotive industry and / or customer specific requirements with regards
to product discontinuance and process change notification. All products are sold subject to IR’s terms and
conditions of sale supplied at the time of order acknowledgment.
IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance
with IR’s standard warranty. Testing and other quality control techniques are used to the extent IR deems
necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
IR assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using IR components. To minimize the risks with customer products and
applications, customers should provide adequate design and operating safeguards.
Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alterations is an unfair and deceptive business practice. IR is not responsible or liable
for such altered documentation. Information of third parties may be subject to additional restrictions.
Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for that
product or service voids all express and any implied warranties for the associated IR product or service and is
an unfair and deceptive business practice. IR is not responsible or liable for any such statements.
IR products are not designed, intended, or authorized for use as components in systems intended for surgical
implant into the body, or in other applications intended to support or sustain life, or in any other application in which
the failure of the IR product could create a situation where personal injury or death may occur. Should Buyer
purchase or use IR products for any such unintended or unauthorized application, Buyer shall indemnify and
hold International Rectifier and its officers, employees, subsidiaries, affiliates, and distributors harmless against
all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any
claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges
that IR was negligent regarding the design or manufacture of the product.
IR products are neither designed nor intended for use in military/aerospace applications or environments unless
the IR products are specifically designated by IR as military-grade or “enhanced plastic.” Only products
designated by IR as military-grade meet military specifications. Buyers acknowledge and agree that any such
use of IR products which IR has not designated as military-grade is solely at the Buyer’s risk, and that they are
solely responsible for compliance with all legal and regulatory requirements in connection with such use.
IR products are neither designed nor intended for use in automotive applications or environments unless the
specific IR products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part number
including the designation “AU”. Buyers acknowledge and agree that, if they use any non-designated products
in automotive applications, IR will not be responsible for any failure to meet such requirements
For technical support, please contact IR’s Technical Assistance Center
http://www.irf.com/technical-info/
www.irf.com
WORLD HEADQUARTERS:
233 Kansas St., El Segundo, California 90245
Tel: (310) 252-7105
11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet AUIRG4PH50S.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AUIRG4PH50S | Standard Speed IGBT | International Rectifier |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |