MP6003 Datasheet PDF - MPS
| Part Number | MP6003 | |
| Description | Monolithic Flyback/SEPIC DC-DC Converter | |
| Manufacturers | MPS | |
| Logo |  |
|
|
There is a preview and MP6003 download ( pdf file ) link at the bottom of this page. Total 15 Pages | ||
Preview 1 page No Preview Available !
The Future of Analog IC Technology
DESCRIPTION
The MP6003 is a monolithic flyback DC-DC
converter which includes a 150V power switch
and is capable of delivering up to 15W output
power. It can also be used for SEPIC boost and
Flyback and Forward applications.
The MP6003 uses the fixed-frequency peak
current mode primary controller architecture. It
has an internal soft-start, auto-retry, and
incorporates over current, short circuit, and
over-voltage protection. The MP6003 can also
skip cycles to maintain zero load regulation.
It has a direct optocoupler interface which
bypasses the internal error amplifier when an
isolated output is desired.
The MP6003 is ideal for telecom applications,
and is available in a compact, thermally
enhanced SOIC8 package with an exposed pad.
TYPICAL APPLICATION
MP6003
Monolithic Flyback/SEPIC
DC-DC Converter
FEATURES
• Integrated 0.9Ω 150V Power Switch
• Cycle-by-Cycle Current Limiting
• Programmable Switching Frequency
• Duty Cycle Limiting with Line Feed Forward
• Integrated 100V Startup Circuit
• Internal Slope Compensation
• Disable Function
• Built-in Soft-Start
• Line Under Voltage Lockout
• Line Over Voltage Protection
• Auto-Restart for Opened/Shorted Output
• Zero Load Regulation
• Thermal Shutdown
APPLICATIONS
• Telecom Equipment
• VoIP Phones, Power over Ethernet (PoE)
• Distributed Power Conversion
All MPS parts are lead-free and adhere to the RoHS directive. For MPS green
status, please visit MPS website under Products, Quality Assurance page.
“MPS” and “The Future of Analog IC Technology” are registered trademarks of
Monolithic Power Systems, Inc.
MP6003 Rev. 1.01
www.MonolithicPower.com
1/26/2014
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
1
|
| |
 
MP6003 – MONOLITHIC FLYBACK/SEPIC DC-DC CONVERTER
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
Performance waveforms are tested on the evaluation board of the Design Example section.
VIN = 36V, VOUT = 5V, IOUT = 1A, TA = 25ºC, unless otherwise noted.
MP6003 Rev. 1.01
www.MonolithicPower.com
1/26/2014
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for MP6003 electronic component. |
| Information | Total 15 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ MP6003.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| MP6001 | The function is Monolithic Flyback/Forward dd-DC Converter. MPS | |
| MP6001DN-00A | The function is Monolithic Flyback/Forward DC-DC Converter Evaluation Board. MPS | |
| MP6001DN-00D | The function is WLED Driver Evaluation Board. MPS | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
MP60
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||