DataSheetWiki


AX-SFEU fiches techniques PDF

ON Semiconductor - Transceiver IC

Numéro de référence AX-SFEU
Description Transceiver IC
Fabricant ON Semiconductor 
Logo ON Semiconductor 





1 Page

No Preview Available !





AX-SFEU fiche technique
AX-SFEU, AX-SFEU-API
Ultra-Low Power,
AT Command / API Controlled,
Sigfox) Compliant
Transceiver IC for Up-Link
and Down-Link
www.onsemi.com
OVERVIEW
Circuit Description
AXSFEU and AXSFEUAPI are ultralow power
single chip solutions for a node on the Sigfox network with
both upand downlink functionality. The AXSFEU chip
is delivered fully ready for operation and contains all the
necessary firmware to transmit and receive data from the
Sigfox network in Europe. It connects to the customer
product using a logic level RS232 UART. AT commands are
used to send frames and configure radio parameters.
The AXSFEUAPI variant is intended for customers
wishing to write their own application software based on the
AXSFLIB1GEVK library.
Features
Functionality and Ecosystem
Sigfox uplink and downlink functionality controlled
by AT commands or API
The AXSFEU and AXSFAPI ICs are part of a
whole development and product ecosystem available
from ON Semiconductor for any Sigfox requirement.
Other parts of the ecosystem include
Ready to go development kit
DVKSFEU[API]1GEVK including a 2 year
Sigfox subscription
Sigfox Ready® certified reference design for the
AXSFEU and AXSFEUAPI ICs
AXSF10MINI21868B1 and
AXSF10ANT21868B1, Sigfox compliant SMT
modules based on AXSFEU with 50 W pads or chip
antenna. Not available for AXSFEUAPI
General Features
QFN40 5 mm x 7 mm package
Supply range 1.8 V* 3.6 V
40°C to 85°C
Temperature sensor
Supply voltage measurements
*The device is operational from 1.8 V to 3.6 V. However, a supply
voltage below 2.0 V is considered an extreme condition.
Details see Table 4.
10 GPIO pins
4 GPIO pins with selectable voltage measure
functionality, differential (1 V or 10 V range) or
single ended (1 V range) with 10 bit resolution
2 GPIO pins with selectable sigma delta DAC
output functionality
2 GPIO pins with selectable output clock
3 GPIO pins selectable as SPI master interface
Integrated RX/TX switching with differential
antenna pins
Power Consumption
Ultralow Power Consumption:
Charge required to send a Sigfox OOB packet at
14 dBm output power: 0.28 C
Deepsleep mode current: 100 nA
Sleep mode current: 1.3 mA
Standby mode current: 0.5 mA
Continuous radio RXmode at 869.525 MHz :
10 mA
Continuous radio TXmode at 868.130 MHz
19 mA @ 0 dBm
49 mA @ 14 dBm
High Performance Narrowband Sigfox RF Transceiver
Receiver
Carrier frequency 869.525 MHz
Datarate 600 bps FSK
Sensitivity
126 dBm @ 600 bps, 869.525 MHz, GFSK
0 dBm maximum input power
Transmitter
Carrier frequency 868.13 MHz
Datarate 100 bps PSK
High efficiency, high linearity integrated power
amplifier
Maximum output power 14 dBm
Power level programmable in 1 dBm steps
Applications
Sigfox networks uplink and downlink.
© Semiconductor Components Industries, LLC, 2016
August, 2016 Rev. 4
1
Publication Order Number:
AXSFEU/D

PagesPages 20
Télécharger [ AX-SFEU ]


Fiche technique recommandé

No Description détaillée Fabricant
AX-SFEU Transceiver IC ON Semiconductor
ON Semiconductor
AX-SFEU-API Transceiver IC ON Semiconductor
ON Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche