DataSheetWiki


IW1698 fiches techniques PDF

iWatt - Low-Power Off-line Digital Green-Mode PWM Controller

Numéro de référence IW1698
Description Low-Power Off-line Digital Green-Mode PWM Controller
Fabricant iWatt 
Logo iWatt 





1 Page

No Preview Available !





IW1698 fiche technique
iW1698
Low-Power Off-line Digital Green-Mode PWM Controller
1.0 Features
● Primary-side feedback eliminates opto-isolators and
simplifies design
● No-load power consumption < 30 mW at 230 Vac with
typical application circuit (5 star rating)
● Adaptive multi-mode PWM/PFM control improves
efficiency
Quasi-resonant operation for highest overall efficiency
EZ-EMI ® design to easily meet global EMI standards
● Direct drive of low-cost BJT switch
● Dynamic base current control
Very tight constant voltage and constant current
regulation with primary-side-only feedback
● No external compensation components required
Complies with EPA 2.0 energy-efficiency specifications
with ample margin
Low start-up current (8 μA typical)
● Built-in soft start
Built-in short circuit protection and output overvoltage
protection
● Built-in current sense resistor short circuit protection
No audible noise over entire operating range
2.0 Description
The iW1698 is a high performance AC/DC power supply
controller which uses digital control technology to build peak
current mode PWM flyback power supplies. The device
directly drives a power BJT and operates in quasi-resonant
mode to provide high efficiency along with a number of key
built-in protection features while minimizing the external
component count, simplifying EMI design and lowering the
total bill of material cost. The iW1698 removes the need
for secondary feedback circuitry while achieving excellent
line and load regulation. It also eliminates the need for loop
compensation components while maintaining stability over
all operating conditions. Pulse-by-pulse waveform analysis
allows for a loop response that is much faster than traditional
solutions, resulting in improved dynamic load response. The
built-in power limit function enables optimized transformer
design in universal off-line applications and allows for a wide
input voltage range.
iWatt’s innovative proprietary technology ensures that power
supplies built with iW1698 can achieve both highest average
efficiency and less than 30 mW no-load power consumption
with typical application circuit.
3.0 Applications
Low power AC/DC adapter/chargers for cell phones,
PDAs, digital still cameras
● Linear AC/DC replacement
L
+
N
+ VOUT
GND
U1
iW1698
1 VCC
OUTPUT 5
2 GND
3 VSENSE
ISENSE 4
Rev. 1.2
Figure 3.1: iW1698 Typical Application Circuit (Achieving < 30 mW No-load Power Consumption)
iW1698
February 6, 2012
Page 1

PagesPages 11
Télécharger [ IW1698 ]


Fiche technique recommandé

No Description détaillée Fabricant
IW1690 Low-Power Off-line Digital PWM Controller iWatt
iWatt
iW1691 Digital PWM Current-Mode Controller iWatt
iWatt
IW1692 Low Power Off-Line Digital PWM Controller iWatt
iWatt
IW1696 Low-Power Off-line Digital Green-Mode PWM Controller iWatt
iWatt

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche