DataSheetWiki


IW1706 fiches techniques PDF

iWatt - Low-Power Off-Line Digital Green-Mode PWM Controller

Numéro de référence IW1706
Description Low-Power Off-Line Digital Green-Mode PWM Controller
Fabricant iWatt 
Logo iWatt 





1 Page

No Preview Available !





IW1706 fiche technique
iW1706
Low-Power Off-Line Digital Green-Mode PWM Controller
1.0 Features
2.0 Description
● Primary-side feedback eliminates opto-isolators and
simplifies design
● Adaptively controlled soft start-up enables fast and
smooth start-up for a wide range of capacitive loads
(from 330 μF to 6000 μF)
Very tight constant voltage regulation
EZ-EMI ® design enhances manufacturability
● Intrinsically low common mode noise
Optimized 72 kHz maximum PWM switching frequency
achieves best size and efficiency
Adaptive multi-mode PWM/PFM control improves
efficiency
Quasi-resonant operation for highest overall efficiency
● Direct drive of low-cost BJT switch
● Dynamic base current control
No external compensation components required
Complies with EPA 2.0 energy-efficiency specifications
with ample margin
Built-in short circuit protection and output overvoltage
protection
The iW1706 is a high performance AC/DC power supply
controller which uses digital control technology to build peak
current mode PWM flyback power supplies. The device
directly drives a power BJT and operates in quasi-resonant
mode to provide high efficiency along with a number of key
built-in protection features while minimizing the external
component count, simplifying EMI design and lowering the
total bill of material cost. The iW1706 features a distinctive
soft-start scheme, which allows for fast and yet smooth
start-up with both small and large capacitive loads. The
iW1706 removes the need for secondary feedback circuitry
while achieving excellent line and load regulation. It also
eliminates the need for loop compensation components
while maintaining stability over all operating conditions.
Pulse-by-pulse waveform analysis allows for a loop
response that is much faster than traditional solutions,
resulting in improved dynamic load response. The built-in
power limit function enables optimized transformer design
in universal off-line applications and allows for a wide input
voltage range.
iWatt’s innovative proprietary technology ensures that
power supplies built with the iW1706 can achieve both
highest average efficiency and fast yet smooth start-up with
a wide range of capacitive loads, and are ideal for network
power adapter applications.
● Built-in current sense resistor short circuit protection
● Constant current control enables output current limit and
overload protection
No audible noise over entire operating range
3.0 Applications
● Network power adapters for ADSL, wireless access
points, routers.
L
+
N
+ VOUT
GND
U1
iW1706
1 VCC
OUTPUT 5
2 GND
3 VSENSE
ISENSE 4
Figure 3.1: iW1706 Typical Application Circuit
Rev. 1.1
iW1706
February 1, 2012
Page 1

PagesPages 11
Télécharger [ IW1706 ]


Fiche technique recommandé

No Description détaillée Fabricant
IW1700 Zero Power No-Load Off-Line Digital PWM Controller iWatt
iWatt
IW1706 Low-Power Off-Line Digital Green-Mode PWM Controller iWatt
iWatt
IW1707 Low-Power Off-Line Digital Green-Mode PWM Controller iWatt
iWatt

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche