DataSheetWiki


QPI-6 fiches techniques PDF

Picor - 14 A Active EMI Filter SIP

Numéro de référence QPI-6
Description 14 A Active EMI Filter SIP
Fabricant Picor 
Logo Picor 





1 Page

No Preview Available !





QPI-6 fiche technique

14 A Active EMI Filter SIP for 48 Vdc Bus
QPI-6
QUIETPOWER
Description:
The QPI-6 active EMI filter attenuates conducted common-
mode (CM) and differential-mode (DM) noise over the
CISPR22 frequency range of 150 kHz to 30 MHz. The product
is designed for use on 48 Vdc bus (36 76 Vdc) systems, with
100 Vdc surge capability. The QPI-6’s 14 A rating supports
multiple DC-DC converter loads up to an ambient
temperature of 65°C without de-rating. Designed for the
telecom and ITE bus range, the QPI-6 supports the PICMG®
3.0 specification for filtering system boards to the EN55022
Class B limits.
In comparison to passive solutions, the use of active filtering
reduces the volume of the common-mode choke, providing a
low profile, surface mount device. Smaller size saves valuable
board real estate and the reduced height enhances airflow in
blade applications.
The QPI-6 is available as a
lidded or an open-frame SiP
(System-in-Package) with
LGA mounting. Evaluation
boards are available to allow
for quick in-circuit testing of
the QPI-6LZ within an
existing system design.
Figure 1 - QPI-6LZ
(~1 in2 area)
Features:
40 dB CM attenuation at 250 KHz (50Ω)
80 dB DM attenuation at 250 KHz (50Ω)
80 Vdc (max input)
100 Vdc surge 100 ms
1,500 Vdc hipot hold off to shield plane
14 A rating
25.3 x 25.3 x 5.0 mm Lidded SiP (System-in-Package)
24.9 x 24.9 x 4.4 mm Open-frame SiP
Low profile LGA package
-40° to +125°C Ambient temperature (see Figure 12)
Efficiency >99%
Connect in series for higher attenuation
TÜV Certified
Applications
ATCA blades
Telecom base stations
IBA & distributed power
Network switches and routers
Optical line-cards
TD-SCMA wireless infrastructure
Typical Application:
Figure 2 Typical QPI-6 application schematic with a Vicor brick converter. (1)
Note 1: CB1 capacitor, referenced in all schematics, is a 47uF electrolytic; United Chemi-Con EMVE101ARA470MKE0S or equivalent.
CY1 to CY4, referenced in all schematics, are 4.7nF hi-voltage safety capacitors; Vishay VY1472M63Y5UQ63V0 or equivalent.
CIN is the manufacturer’s recommended value for input capacitor.
Picor Corporation · picorpower.com
QPI-6
Rev 2.6, Page 1 of 13

PagesPages 13
Télécharger [ QPI-6 ]


Fiche technique recommandé

No Description détaillée Fabricant
QPI-21 Active EMI Input Module Picor
Picor
QPI-6 14 A Active EMI Filter SIP Picor
Picor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche