|
|
PDF S70GL02GP Data sheet ( Hoja de datos )
| Número de pieza | S70GL02GP | |
| Descripción | 3.0 Volt-only Page Mode Flash Memory | |
| Fabricantes | SPANSION | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de S70GL02GP (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
|
No Preview Available !
S70GL-P MirrorBitTM Flash
S70GL02GP
2 Gigabit, 3.0 Volt-only Page Mode Flash Memory featuring
90 nm MirrorBit Process Technology
Data Sheet (Advance Information)
S70GL-P MirrorBitTM Flash Cover Sheet
Notice to Readers: This document contains information on one or more products under development at
Spansion Inc. The information is intended to help you evaluate this product. Do not design in this product
without contacting the factory. Spansion Inc. reserves the right to change or discontinue work on this
proposed product without notice.
Publication Number S70GL-P_00
Revision 01
Issue Date December 4, 2006
1 page  
Data Sheet (Advance Information)
1. Ordering Information
The ordering part number is formed by a valid combination of the following:
S70GL02GP
10 F A I 01 0
PACKING TYPE
0 = Tray (standard; see (Note 1)
2 = 7” Tape and Reel
3 = 13” Tape and Reel
MODEL NUMBER (VIO range, protection when WP# =VIL)
01 = VIO = VCC = 2.7 to 3.6 V, highest address sector protected
02 = VIO = VCC = 2.7 to 3.6 V, lowest address sector protected
V1 = VIO = 1.65 to VCC, VCC = 2.7 to 3.6 V, highest address sector protected
V2 = VIO = 1.65 to VCC, VCC = 2.7 to 3.6 V, lowest address sector protected
R1 = VIO = VCC = 3.0 to 3.6 V, highest address sector protected
R2 = VIO = VCC = 3.0 to 3.6 V, lowest address sector protected
TEMPERATURE RANGE
I = Industrial (–40°C to +85°C)
PACKAGE MATERIALS SET
A = Pb (Note 3)
F = Pb-free
PACKAGE TYPE
F = Fortified Ball Grid Array, 1.0 mm pitch package
SPEED OPTION
11 = 110 ns
12 = 120 ns
13 = 130 ns
DEVICE NUMBER/DESCRIPTION
S70GL02GP
3.0 Volt-only, 2048 Megabit (256 M x 16-Bit/512 M x 8-Bit) Page-Mode Flash Memory
Manufactured on 90 nm MirrorBitTM process technology
Base Part Number
S70GL02GP
S70GL02GP Valid Combinations
Speed (ns)
Package &
Temperature
Model Number
11 R1, R2
12
FAI , FFI
(Note 3)
01 (Note 3), 02
13 V1 (Note 3), V2
Pack Type
0, 2, 3 (Note 1)
Notes
1. Type 0 is standard. Specify other options as required.
2. BGA package marking omits leading “S70” and packing type designator from ordering part number.
3. Contact local sales representative for availability.
Package Description
LSE064 (Fortified BGA) (Note 2)
1.1 Recommended Combinations
Recommended Combinations list configurations planned to be supported in volume for this device. Consult
your local sales office to confirm availability of specific recommended combinations and to check on newly
released combinations.
December 4, 2006 S70GL-P_00_01
S70GL-P MirrorBitTM Flash Family
3
5 Page 
Data Sheet (Advance Information)
7. Common Flash Memory Interface
The Common Flash Interface (CFI) specification outlines device and host system software interrogation
handshake, which allows specific vendor-specified software algorithms to be used for entire families of
devices. Software support can then be device-independent, JEDEC ID-independent, and forward- and back-
ward-compatible for the specified flash device families. Flash vendors can standardize their existing
interfaces for long-term compatibility.
This device enters the CFI Query mode when the system writes the CFI Query command, 98h, to address
55h any time the device is ready to read array data. The system can read CFI infomation at the addresses
given in Tables 7.2–7.4). All reads outside of the CFI address range, returns non-valid data. Reads from other
sectors are allowed, writes are not. To terminate reading CFI data, the system must write the reset command.
The system can also write the CFI query command when the device is in the autoselect mode. The device
enters the CFI query mode, and the system can read CFI data at the addresses given in Tables 7.2–7.4. The
system must write the reset command to return the device to reading array data.
The following is a C source code example of using the CFI Entry and Exit functions. Refer to the Spansion
Low Level Driver User’s Guide (available on www.spansion.com) for general information on Spansion Flash
memory software development guidelines.
/* Example: CFI Entry command */
*( (UINT16 *)base_addr + 0x55 ) = 0x0098; /* write CFI entry command
*/
/* Example: CFI Exit command */
*( (UINT16 *)base_addr + 0x000 ) = 0x00F0; /* write cfi exit command
*/
For further information, please refer to the CFI Specification (see JEDEC publications JEP137-A and
JESD68.01and CFI Publication 100). Please contact your sales office for copies of these documents.
Addresses (x16)
10h
11h
12h
13h
14h
15h
16h
17h
18h
19h
1Ah
Addresses (x8)
20h
22h
24h
26h
28h
2Ah
2Ch
2Eh
30h
32h
34h
Table 7.1 CFI Query Identification String
Data
Description
0051h
0052h
0059h
Query Unique ASCII string “QRY”
0002h
0000h
Primary OEM Command Set
0040h
0000h
Address for Primary Extended Table
0000h
0000h
Alternate OEM Command Set (00h = none exists)
0000h
0000h
Address for Alternate OEM Extended Table (00h = none exists)
December 4, 2006 S70GL-P_00_01
S70GL-P MirrorBitTM Flash Family
9
11 Page | ||
| Páginas | Total 14 Páginas | |
| PDF Descargar | [ Datasheet S70GL02GP.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| S70GL02GP | 2 Gbit / 3V Page Mode S70GL-P MirrorBit Flash |  Cypress Semiconductor |
| S70GL02GP | 3.0 Volt-only Page Mode Flash Memory | SPANSION |
| S70GL02GS | 2 Gbit (256 Mbyte) 3.0V Flash Memory | Cypress Semiconductor |
| S70GL02GT | 2-Gbit (256-Mbyte) 3.0V Flash Memory | Cypress Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |