DataSheetWiki


PL160-104L fiches techniques PDF

Coilcraft - SMT Planar Transformers

Numéro de référence PL160-104L
Description SMT Planar Transformers
Fabricant Coilcraft 
Logo Coilcraft 





1 Page

No Preview Available !





PL160-104L fiche technique
Document 1072-1
SMT Planar Transformers ForApplications
up to 160 Watts
• Rated for 160 Watts
• Designed to operate between 200 kHz and 700 kHz with a
nominal 48 V input.
• High efficiency; excellent DCR; very low leakage inductance;
1500 Vrms, one minute primary to secondary isolation.
• Provides 0.009(0.229 mm) clearance above the seating plane
• May be special ordered with an auxiliary winding
Core material Ferrite
Terminations  Matte tin over nickel over brass
Weight12.0 – 12.8 g
Ambient temperature  –40°C to +125°C
Storage temperature  Component: –40°C to +125°C.
Tray packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  36 per tray
PCB washing  Tested with pure water or alcohol only. For other
solvents, see Doc787_PCB_Washing.pdf
Pa rt Ptruimrnasr y inPdruicmtaanryc e2 inLdeuacktaagnec e3 DCR m ax (mOhms )
number1
N1  N2 min (µH) max (µH) Primary (N1) Primary (N2) Secondary4
PL160-100L
PL160-101L
PL160-102L
PL160-103L
PL160-104L
4 4
4 5
5 5
5 6
6 6
153
194
240
290
345
0.35
0.40
0.45
0.55
0.55
14.7
14.7
18.5
18.5
21.5
14.7
18.5
18.5
21.5
21.5
6.8
6.8
6.8
6.8
6.8
prVoodltu-tcitmtey p5
Height
max
(Vµsec)
(in / mm)
150 0.352 / 8.94
168 0.352 / 8.94
187 0.360 / 9.14
206 0.375 / 9.53
224 0.375 / 9.53
1. To order a transformer with an optional auxiliary winding, add an “X” and the turn count after the PL160, e.g. PL160X3-100LB.
Turn counts of 2, 3, 4, 5, 7 and 9 are available for the auxiliary winding. Transformers with auxiliary windings are not stocked.
2. Inductance measured on an Agilent/HP 4284 at 200 kHz, 0.5 Vrms, 0 Adc between pins 2 and 5 with pins 3 and 4 connected.
3. Leakage inductance measured at 200 kHz, 0.5 Vrms, 0 Adc between pins 2 and 5, with pins 3 and 4 connected, and with all
secondary pins shorted.
4. DCR for secondary is measured between pins 7 and 11.
5. Volt-time product is based on primary windings connected in series.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
2
Pri N1
4
3
Pri N2
5
1
Aux (Opt)
6
11
1T
10
1T
9
1T
8
1T
7
US +1-847S-p6e3c9if-i6c4a0ti0onssasluebsj@ecctotiolccrahfat.ncgoemwithout notice.
UK +44-1P23le6a-s7e30c5h9e5ck soaulrews@ebcsoiitlecrfaofrt-leauterospt ein.fcoormmation.
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 1072-1  Revised 05/04/15
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.

PagesPages 2
Télécharger [ PL160-104L ]


Fiche technique recommandé

No Description détaillée Fabricant
PL160-104L SMT Planar Transformers Coilcraft
Coilcraft

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche