DataSheet.es    


PDF P460HVN01.3 Data sheet ( Hoja de datos )

Número de pieza P460HVN01.3
Descripción Color TFT-LCD
Fabricantes AUO 
Logotipo AUO Logotipo



Hay una vista previa y un enlace de descarga de P460HVN01.3 (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! P460HVN01.3 Hoja de datos, Descripción, Manual

P460HVN01.3 Product Specification
Rev. 0.0
Model Name: P460HVN01.3
Issue Date : 2014/12/24
()Preliminary Specifications
( )Final Specifications
Customer Signature
Date AUO
Date
Approved By
_________________________________
Reviewed By PM Director
Kelly Kao
____________________________________
Note
Reviewed By RD Director
Eugene CC Chen
____________________________________
Reviewed By Project Leader
MingYu Wu
____________________________________
Prepared By PM
Travis Huang
____________________________________
© Copyright AU Optronics Corp. 2009 All Rights Reserved.
Page 1 / 34
www.braemac.co.uk tel: +44 1925 419090 fax: +44 1925 419091 [email protected]

1 page




P460HVN01.3 pdf
P460HVN01.3 Product Specification
Rev. 0.0
2. Absolute Maximum Ratings
The followings are maximum values which, if exceeded, may cause faulty operation or damage to the unit
Item
Logic/LCD Drive Voltage
Input Voltage of Signal
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Panel Surface Temperature
Symbol
VDD
Vin
TOP
HOP
TST
HST
PST
Min
-0.3
-0.3
0
10
-20
10
Max
14
4
+50
90
+60
90
65
Unit
[Volt]
[Volt]
[oC]
[%RH]
[oC]
[%RH]
[oC]
Conditions
Note 1
Note 1
Note 2
Note 2
Note 2
Note 2
Note 3
Note 1: Duration:50 msec.
Note 2 : Maximum Wet-Bulb should be 39 and No condensation.
The relative humidity must not exceed 90% non-condensing at temperatures of 40
greater than 40 , the wet bulb temperature must not exceed 39 .
Note 3: Surface temperature is measured at 50 Dry condition
or less. At temperatures
© Copyright AU Optronics Corp. 2009 All Rights Reserved.
Page 5 / 34
www.braemac.co.uk tel: +44 1925 419090 fax: +44 1925 419091 [email protected]

5 Page





P460HVN01.3 arduino
P460HVN01.3 Product Specification
Rev. 0.0
Note1. Pin number start from the left side as the following figure.
Note2. Please leave this pin unoccupied. It can not be connected by any signal (Low/GND/High).
Note3. Input control signal threshold voltage definition
Item Symbol Min.
Input High Threshold Voltage VIH
2.7
Input Low Threshold Voltage
VIL
0
Typ.
-
-
Max. Unit
3.6 V
0.6 V
Note4. LVDS data format selection
LVDS_SEL Mode
H or OPEN NS
L Jeida
Input equivalent impedance of LVDE_SEL pin
© Copyright AU Optronics Corp. 2009 All Rights Reserved.
Page 11 / 34
www.braemac.co.uk tel: +44 1925 419090 fax: +44 1925 419091 [email protected]

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet P460HVN01.3.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
P460HVN01.0Color TFT-LCDAUO
AUO
P460HVN01.1TFT LCD ModuleAUO
AUO
P460HVN01.2TFT LCD ModuleAUO
AUO
P460HVN01.3Color TFT-LCDAUO
AUO

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar