|
|
PDF SKY13416-485LF Data sheet ( Hoja de datos )
| Número de pieza | SKY13416-485LF | |
| Descripción | 0.1 to 3.8 GHz SP6T Antenna Switch | |
| Fabricantes | Skyworks Solutions | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SKY13416-485LF (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
DATA SHEET
SKY13416-485LF: 0.1 to 3.8 GHz SP6T Antenna Switch
Applications
Any 2G/3G/4G antenna diversity or LTE (TDD/FDD)
transmit/receive system for which GSM transmit is not required
Features
Broadband frequency range: 0.1 to 3.8 GHz
Low insertion loss: 0.5 dB typical @ 2.7 GHz
High isolation: >26 dB @ 2.7 GHz
Integrated logic
Small QFN (14-pin, 2.0 x 2.0 mm) package
(MSL1, 260 C per JEDEC J-STD-020)
RF1
RF2
RF3
RF4
RF5
RF6
ANT
Skyworks Green™ products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of Green™, document number
SQ04-0074.
Bias Decoder
Figure 1. SKY13416-485LF Block Diagram
Description
The SKY13416-485LF is a single pole, six-throw (SP6T) antenna
switch. The high linearity performance and low insertion loss
achieved by the SKY13416-485LF make it an ideal choice for
main/diversity switching commonly used in LTE-based handsets,
data cards, and tablets that use antenna diversity solutions.
The SKY13416-485LF is part of a scalable family of products that
covers SP4T through SP8T switches that allow up to eight bands
of WCDMA/LTE:
SKY13414-485LF SP4T Antenna Switch (Data Sheet #201689)
SKY13415-485LF SP5T Antenna Switch (Data Sheet #201704)
SKY13416-485LF SP6T Antenna Switch (this Data Sheet)
SKY13417-485LF SP7T Antenna Switch (Data Sheet #201661)
SKY13418-485LF SP8T Antenna Switch (Data Sheet #201712)
The symmetric port designs provide flexibility in signal routing for
both receive diversity and higher power
TD-SCDMA/TDD-LTE, WCDMA/FDD, and LTE transmit/receive
applications.
Switching is controlled by three CMOS/TTL-compatible control
voltage inputs (V1, V2, and V3). Depending on the logic voltage
level applied to the control pins, the ANT pin is connected to one
of six switched RF outputs (RF1 to RF6) using a low insertion loss
path, while the paths between the ANT pin and the other RF pins
are in a high isolation state. No external blocking capacitors are
required on the RF paths unless VDC is externally applied.
The SKY13416-485LF is manufactured in a compact, 14-pin
2.0 x 2.0 mm, Quad Flat No-Lead (QFN) package.
A functional block diagram is shown in Figure 1. The pin
configuration and package are shown in Figure 2. Signal pin
assignments and functional pin descriptions are provided in
Table 1.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201679G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 24, 2016
1
1 page  
DATA SHEET • SKY13416-485LF: SP6T ANTENNA SWITCH
Table 4. SKY13416-485LF Control Logic1
Control Pins
Switched RF Outputs
V1
(Pin 7)
V2
(Pin 6)
V3
(Pin 5)
RF1
(Pin 3)
RF2
(Pin 9)
RF3
(Pin 2)
RF4
(Pin 10)
RF5
(Pin 1)
0
0
0
Insertion Loss
Isolation
Isolation
Isolation
Isolation
0
0
1
Isolation
Insertion Loss
Isolation
Isolation
Isolation
0
1
0
Isolation
Isolation
Insertion Loss
Isolation
Isolation
0
1
1
Isolation
Isolation
Isolation
Insertion Loss
Isolation
1
0
0
Isolation
Isolation
Isolation
Isolation
Insertion Loss
1
0
1
Isolation
Isolation
Isolation
Isolation
Isolation
1
1
0
Isolation
Isolation
Insertion Loss
Isolation
Insertion Loss
111
Shutdown Mode
1 “High” = 1.8 V; “Low” = 0 V. Any state other than that described in this table places the switch into an undefined state. An undefined state will not damage the device.
Insertion loss in V1/V2/V3 = 110b state is 3 dB lower than typical insertion loss.
RF6
(Pin 11)
Isolation
Isolation
Isolation
Isolation
Isolation
Insertion Loss
Isolation
Table 5. Isolation Matrix (1 of 2)
“On” Port
Frequency
(GHz)
RF1 RF2
Isolation
(dB)
RF3 RF4
RF5
RF6
Antenna-to-Port
RF1 1.0
–48 –41 –42 –39 –38
RF1 2.0
–40 –32 –36 –30 –31
RF1 2.7
–37 –28 –33 –26 –28
RF1 3.8
–32 –18 –34 –25 –31
RF2 1.0 –45
–40 –40 –36 –39
RF2 2.0 –38
–34 –33 –30 –31
RF2 2.7 –35
–31 –29 –27 –27
RF2 3.8 –32
–33 –18 –29 –25
RF3 1.0 –38 –47
–43 –42 –38
RF3 2.0 –31 –40
–36 –31 -31
RF3 2.7 –28 –36
–33 –26 –28
RF3 3.8 –18 –34
–34 –18 –31
RF4 1.0 –44 –38 –40
–37 –43
RF4 2.0 –37 –32 –34
–30 –31
RF4 2.7 –34 –29 –31
–27 -27
RF4 3.8 –33 –18 –33
–29 -19
RF5 1.0 –47 –47 –38 –44
–39
RF5 2.0 –36 –40 –30 –36
–32
RF5 2.7 –31 –36 –27 –33
–29
RF5 3.8 –22 –33 –17 –33
–30
RF6 1.0 –45 –49 –41 –39 –38
RF6 2.0 –38 –37 –35 -31 –31
RF6 2.7 –35 –32 –31 -28 –28
RF6 3.8 –33 –23 –32 -17 –29
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201679G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 24, 2016
5
5 Page 
DATA SHEET • SKY13416-485LF: SP6T ANTENNA SWITCH
0.23 ± 0.05
2.00 ± 0.05
4.00 ± 0.10
Ø1.50 + 0.10/–0.00
Pin 1
1.75 ± 0.10
A
7º 2.25 ± 0.05
3.50 ± 0.05
8.00 ± 0.20
0.70 ± 0.05 (Ko)
Section A
4.00 ± 0.10
B
7º
BA
2.25 ± 0.05
Notes:
Section B
1. Carrier tape must meet all requirements of Skyworks GP01-D232 procurement spec for tape and reel shipping.
2. Carrier tape shall be black conductive polycarbonate bakeable material at 125 ˚C temperature.
3. Cover tape shall be transparent conductive with 5.40 mm width.
4. ESD-surface resistivity must meet all ESD requirements of Skyworks specified on GP01-D232.
5. All measurements are in millimeters.
201679-008
Figure 8. SKY13416-485LF Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201679G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 24, 2016
11
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet SKY13416-485LF.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SKY13416-485LF | 0.1 to 3.8 GHz SP6T Antenna Switch | Skyworks Solutions |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |