|
|
Numéro de référence | FP7151 | ||
Description | 700mA LED Driver | ||
Fabricant | Feeling Technology | ||
Logo | |||
700mA LED Driver with Internal Switch
FP7151
General Description
The FP7151 is a continuous mode inductive step down converter. It can driving single or multiple
series connected LEDs. The FP7151 includes the output switch and a high-side output current sensing
circuit, which use an external resistor to set the average output current. Output current can also be
adjusted by applying an external signal to the ‘ADJ’ pin. The ADJ pin will accept either a DC voltage or
a PWM waveform. The PWM filter components are contained within the chip. Applying a voltage under
0.2V to the ADJ pin will turn off the output.
The FP7151 is available in the SOT23-5L package and provides space-saving PCB for the
application fields.
Features
700mA Output Current
Internal 0.7Ω 26V Power MOSFET Switch
Wide 7 to 26V Operating Input Range
20μA Shutdown Mode Current
Typical 4% Output Current Accuracy
Signal pin ON / OFF and Brightness Control
Adjustable Soft-Start
Up to 95% Efficiency
Up to 1MHz Switching Frequency
Internal Dimming Filter
Package: SOT23-5L
Applications
Low Voltage Halogen replacement LEDs
LED back-up lighting
Typical Application Circuit
This datasheet contains new product information. Feeling Technology reserves the rights to modify the product specification without notice.
No liability is assumed as a result of the use of this product. No rights under any patent accompany the sales of the product.
Website: http://www.feeling-tech.com.tw
Rev. 0.63
1/13
|
|||
Pages | Pages 13 | ||
Télécharger | [ FP7151 ] |
No | Description détaillée | Fabricant |
FP7151 | 700mA LED Driver | Feeling Technology |
FP7152 | 1A LED Driver | Feeling Technology |
US18650VTC5A | Lithium-Ion Battery | Sony |
TSPC106 | PCI Bus Bridge Memory Controller | ATMEL |
TP9380 | NPN SILICON RF POWER TRANSISTOR | Advanced Semiconductor |
www.DataSheetWiki.com | 2020 | Contactez-nous | Recherche |