|
|
Número de pieza | SURT2000XLI | |
Descripción | Smart-UPS RT External Battery Pack User Manual | |
Fabricantes | APC | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SURT2000XLI (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
No Preview Available ! APC Smart-UPS® RT
External Battery Pack
For Use With Models SURT1000XLI and SURT2000XLI
Tower/Rack Mount Convertible
User’s Manual
English
990-1083A, 01/03
1 page 2: INSTALLING THE BATTERY PACK
The APC Smart-UPS RT External Battery Pack provides extended protection to safeguard your
computer and other valuable electronic equipment. The external battery pack also provides extra pro-
tection while replacing the batteries in the UPS.
MAXIMUM NUMBER OF BATTERY PACKS SUPPORTED BY THE UPS
The Smart-UPS RT can support an unlimited number of external battery packs. Battery pack con-
nectors are color-coded and keyed to prevent improper connection. Models SURT1000XLI and
SURT2000XLI both use battery pack model SURT48XLBP. Both are designed to operate in the
tower configuration and rack mount configuration.
UNPACKING
1. Inspect the battery pack upon receipt. APC designed robust packaging for your product. How-
ever, accidents and damage may occur during shipment. Notify the carrier and dealer if there is
damage.
The packaging is recyclable; save it for reuse or dispose of it properly.
2. Check the package contents. The shipping package contains the battery pack, its front bezel
(packaged separately), mounting foot expansion piece, rear bracket tie, and a literature kit con-
taining product documentation.
The battery pack is shipped with the front bezel removed (packaged separately within
the main box). You will install the plastic bezel during the installation procedure.
POSITIONING THE BATTERY PACK
Place the battery pack where it will be used. The battery pack is heavy. Select a location sturdy
enough to handle the weight.
Consider that you must install the battery pack in a protected area that is free of excessive dust and
has adequate airflow. Ensure the air vents on the front and rear of the battery pack are not blocked.
Allow at least one inch of space on both sides.
Do not operate the UPS where the temperature and humidity are outside the specified limits. Refer to
Specifications at the APC web site.
PLACEMENT
3
5 Page 4: STORAGE, SERVICE, AND CONTACT INFORMATION
STORAGE
STORAGE CONDITIONS
Store the battery pack covered and flat (rack mount orientation) in a cool, dry location, with its bat-
tery fully charged. Disconnect battery cables to avoid drain on batteries.
EXTENDED STORAGE
At -15 to +30 °C (+5 to +86 °F), charge the batteries every six months.
At +30 to +45 °C (+86 to +113 °F), charge the batteries every three months.
REPLACING A BATTERY TRAY
The battery pack has two easy to replace, hot-swappable battery trays. Battery tray replacement is a
safe procedure, isolated from electrical hazards. You may leave the battery pack connected to the
UPS with the protected equipment when replacing battery trays. See the APC website http://
www.apc.com /support, to confirm the correct replacement battery tray number (RBC) and to see
other options. Follow the instructions in your UPS User’s Manual and in this manual in the Installa-
tion section.
DECLARATION OF CONFORMITY
9
11 Page |
Páginas | Total 12 Páginas | |
PDF Descargar | [ Datasheet SURT2000XLI.PDF ] |
Número de pieza | Descripción | Fabricantes |
SURT2000XLI | Smart-UPS RT External Battery Pack User Manual | APC |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |