DataSheetWiki


HS-26CLV32RH fiches techniques PDF

Intersil - Radiation Hardened 3.3V Quad Differential Line Receivers

Numéro de référence HS-26CLV32RH
Description Radiation Hardened 3.3V Quad Differential Line Receivers
Fabricant Intersil 
Logo Intersil 





1 Page

No Preview Available !





HS-26CLV32RH fiche technique
DATASHEET
Radiation Hardened 3.3V Quad Differential Line
Receivers
HS-26CLV32RH, HS-26CLV32EH
The Intersil HS-26CLV32RH, HS-26CLV32EH are radiation
hardened 3.3V quad differential line receivers designed for
digital data transmission over balanced lines, in low voltage,
RS-422 protocol applications. Radiation hardened CMOS
processing assures low power consumption, high speed, and
reliable operation in the most severe radiation environments.
The HS-26CLV32RH, HS-26CLV32EH have an input sensitivity
of 200mV (typical) over a common-mode input voltage range
of -4V to +7V. The receivers are also equipped with input
fail-safe circuitry, which causes the outputs to go to a logic “1”
when the inputs are open. The device has unique inputs that
remain high impedance when the receiver is disabled or
powered-down, maintaining signal integrity in multi-receiver
applications.
Specifications for Rad Hard QML devices are controlled by the
Defense Logistics Agency Land and Maritime (DLA). The SMD
numbers listed must be used when ordering.
Related Literature
• For a full list of related documents, visit our website
- HS-26CLV32RH and HS-26CLV32EH product pages
Features
• Electrically screened to SMD # 5962-95689
• QML qualified per MIL-PRF-38535 requirements
• 1.2 micron radiation hardened CMOS
- Total dose . . . . . . . . . . . . . . . . . . . . . . . . . 300krad(Si) (max)
- Single event upset LET . . . . . . . . . . . . . 100MeV/mg/cm2)
- Single event latch-up immune
• Low stand-by current . . . . . . . . . . . . . . . . . . . . . . . 13mA (max)
• Operating supply range . . . . . . . . . . . . . . . . . . . . . 3.0V to 3.6V
• Enable input levels. . . . . . . . .VIH > 0.7 x VDD; VIL < 0.3 x VDD
• CMOS output levels . . . . . . . . . . . . . . VOH > 2.55V; VOL < 0.4V
• Input fail-safe circuitry
• High impedance inputs when disabled or powered-down
• Full -55°C to +125°C military temperature range
• Pb-free (RoHS compliant)
Applications
• Line receiver for MIL-STD-1553 serial data bus
ENABLE ENABLE DIN DIN
CIN CIN
BIN BIN AIN AIN
+-
+-
+-
+-
DOUT
COUT
BOUT
AOUT
FIGURE 1. LOGIC DIAGRAM
February 6, 2017
FN4907.6
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2000, 2008, 2009, 2012, 2013, 2017. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.

PagesPages 6
Télécharger [ HS-26CLV32RH ]


Fiche technique recommandé

No Description détaillée Fabricant
HS-26CLV32RH Radiation Hardened 3.3V Quad Differential Line Receivers Intersil
Intersil

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche