DataSheetWiki


5.0SMDJ30CA fiches techniques PDF

Littelfuse - Transient Voltage Suppression Diodes

Numéro de référence 5.0SMDJ30CA
Description Transient Voltage Suppression Diodes
Fabricant Littelfuse 
Logo Littelfuse 





1 Page

No Preview Available !





5.0SMDJ30CA fiche technique
Transient Voltage Suppression Diodes
Surface Mount – 5000W > 5.0SMDJ series
5.0SMDJ Series
RoHS Pb
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol
Peak Pulse Power Dissipation at
T(FAi=g2.15)O(NCobtey
10x1000µs waveform
1), (Note 2)
PPPM
Power Dissipation on infinite heat
sink at TA=50OC
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave (Note 3)
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
only
Operating Junction and Storage
Temperature Range
PM(AV)
IFSM
VF
TJ, TSTG
Value
5000
6.5
300
5.0
-65 to 150
Unit
W
W
A
V
°C
Typical Thermal Resistance Junction
to Lead
RuJL
15 °C/W
Typical Thermal Resistance Junction
to Ambient
RuJA
75 °C/W
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only,duty cycle=4 per minute maximum.
Description
The 5.0SMDJ series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
• Halogen-Free
• Fast response time:
• RoHS compliant
• For surface mounted
applications to optimize
board space
typically less than 1.0ps
from 0V to BV min
• Excellent clamping
capability
• Low profile package
• Low incremental surge
• Built-in strain relief
resistance
• Typical maximum
temperature coefficient
aTybpoivceal2I2R Vless than 5µA
ΔVBR = 0.1% x VBR@25°C x ΔT
• Glass passivated chip
junction
• 5000W peak pulse power
capability at 10×1000μs
waveform, repetition rate
(duty cycles):0.01%
• High Temperature
soldering guaranteed:
260°C/40 seconds at
terminals
• Plastic package has
Underwriters Laboratory
Flammability 94V-O
• Matte Tin Lead–free Plated
Applications
TVS devices are ideal for the protection of I/O Interfaces,
CVCoCmbpuustaenr,dInodtuhsetrrivaul lannedraCbolencsiurcmueitrseulescetdroinniTcealepcpolimca,tions.
5.0SMDJ Series
1 ©2011 Littelfuse, Inc.
Revision: November 15, 2011, 16:49
Specifications are subject to change without notice.
Please refer to http://www.Littelfuse.com/series/5.0SSMDJ.html for current information.

PagesPages 5
Télécharger [ 5.0SMDJ30CA ]


Fiche technique recommandé

No Description détaillée Fabricant
5.0SMDJ30CA Transient Voltage Suppression Diodes Littelfuse
Littelfuse
5.0SMDJ30CA Rating and Characteristic Curves 5.0SMDJ Series LGE
LGE

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche