|
|
PDF ATM0350D18 Data sheet ( Hoja de datos )
| Número de pieza | ATM0350D18 | |
| Descripción | LCD | |
| Fabricantes | AZ Displays | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ATM0350D18 (archivo pdf) en la parte inferior de esta página. Total 20 Páginas | ||
|
No Preview Available !
AZ DISPLAYS
SPECIFICATIONS FOR
LIQUID CRYSTAL DISPLAY
CUSTOMER APPROVAL
※PART NO. : ATM0350D18 (AZ DISPLAYS VER1.1
APPROVAL
COMPANY
CHOP
CUSTOMER
COMMENTS
AZ DISPLAYS ENGINEERING APPROVAL
DESIGN BY
CHECKED BY
APPROVED BY
YGB
1 page  
ATM0350D18(AZ DISPLAYS) TFT MODULE V1.1
2. PIN ASSIGNMENT
TFT LCD Panel Driving Section
FPC Connector is used for the module electronics interface. The recommended model is
6420 series manufactured by Kyocera.
Pin No.
Symbol
Function
Level
Note
1-2
VBL-
Power for LED backlight(Cathode)
P
3-4
VBL+
Power for LED backlight(Anode)
P
5 NC
6 /RESET
Not use
Hardware reset
--
I
7
CSB
SPI Interface chip select bar
I
8
SCK
SPI interface data clock
I
9
SDI
SPI interface data input
I
10
SDO
SPI interface data output
O
11~18
19~26
B7~B0
G7~G0
Blue data
Green data
I
I
27~34
35
R7-R0
DCLK
Red data
Dot data clock
I
I
36 HSYNC
37 VSYNC
Horizontal sync input
Vertical sync input
I
I
38
39-40
ENB
VDD
Data enable input
Analog power
I
P
41-42
43-46
VCC
NC
Digital power
Not use
P
--
47 SHUT
48 NC
Display shut donw pin
Not use
I
--
49-50
VSS
Ground
P
I: input, O: output, P: Power
AZ DISPLAYS
4
5 Page 
ATM0350D18(AZ DISPLAYS) TFT MODULE V1.1
Note 2: Definition of optical measurement system.
The optical characteristics should be measured in dark room. After 30 minutes operation, the optical properties are
measured at the center point of the LCD screen. (Response time is measured by Photo detector TOPCON
Figure 4.2 Optical measurement system setup
Note 3: Definition of Response time
The response time is defined as the LCD optical switching time interval between “White” state and “Black” state. Rise
time (TON) is the time between photo detector output intensity changed from 90% to 10%. And fall time (TOFF) is the
time between photo detector output intensity changed from 10% to 90%.
AZ DISPLAYS
Figure 4.3 Definition of response.
10
11 Page | ||
| Páginas | Total 20 Páginas | |
| PDF Descargar | [ Datasheet ATM0350D18.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ATM0350D18 | LCD | AZ Displays |
| ATM0350D19 | LIQUID CRYSTAL DISPLAY | AZ Displays |
| ATM0350D19-T | LCD | AZ Displays |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |