DataSheetWiki


MCR218-3 fiches techniques PDF

Digitron Semiconductors - SILICON CONTROLLED RECTIFIERS

Numéro de référence MCR218-3
Description SILICON CONTROLLED RECTIFIERS
Fabricant Digitron Semiconductors 
Logo Digitron Semiconductors 





1 Page

No Preview Available !





MCR218-3 fiche technique
MCR218 SERIES
High-reliability discrete products
and engineering services since 1977
SILICON CONTROLLED RECTIFIERS
FEATURES
Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.
Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix.
MAXIMUM RATINGS.
Rating
Symbol
Value
Unit
Peak repetitive off-state voltage(1)
(TJ = -40 to +125°C, gate open)
MCR218-2
MCR218-3
MCR218-4
MCR218-6
MCR218-7
MCR218-8
MCR218-10
VDRM
VRRM
50
100
200
400
500
600
800
V
On-state RMS current (180° conduction angles, TC = 70°C)
IT(RMS)
8.0
A
Peak non-repetitive surge current
(one half-cycle, sine wave, 60Hz, TJ = 125°C)
Circuit fusing consideration (t = 8.3ms)
ITSM 100
A
I2t 26 A2s
Forward peak gate power (pulse width ≤ 1.0µs, TC = 70°C)
PGM 5
W
Forward average gate power (t = 8.3ms, TC = 70°C)
Forward peak gate current (pulse width ≤ 1.0µs, TC = 70°C)
PG(AV)
IGM
0.5
2.0
W
A
Operating temperature range
TJ -40 to +125 °C
Storage temperature range
Tstg -40 to +150
°C
Note 1: VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; positive gate voltage shall not be applied concurrent with negative potential on the
anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded.
THERMAL CHARACTERISTICS
Characteristic
Thermal resistance, junction to case
Maximum lead temperature for soldering purposes
1/8” from case for 10s
Symbol
RӨJC
TL
Maximum
2.0
260
Unit
°C/W
°C
ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise specified)
Characteristic
Symbol
OFF CHARACTERISTICS
Peak forward or reverse blocking current
(VAK = Rated VDRM or VRRM, gate open)
TJ = 25°C
TJ = 125°C
IDRM,
IRRM
ON CHARACTERISTICS
Peak on-state voltage*
(ITM = 16A peak)
VTM
Gate trigger current (continuous dc)
(VD = 12V, RL = 100Ω)
IGT
Gate trigger voltage (continuous dc)
(VD = 12V, RL = 100Ω)
VGT
Min Typ Max Unit
- - 10 µA
- - 2.0 mA
- 1.5 1.8 V
- 10 25 mA
- - 1.5 V
Rev. 20130115

PagesPages 3
Télécharger [ MCR218-3 ]


Fiche technique recommandé

No Description détaillée Fabricant
MCR218-10 Thyristor SCR 800V 100A 3-Pin(3+Tab) TO-220 Full-Pak Box New Jersey Semiconductor
New Jersey Semiconductor
MCR218-10 Thyristors Motorola Semiconductors
Motorola Semiconductors
MCR218-10 SILICON CONTROLLED RECTIFIERS Digitron Semiconductors
Digitron Semiconductors
MCR218-10FP Silicon Controlled Rectifier ON Semiconductor
ON Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche