|
|
Número de pieza | BTB10-800BW | |
Descripción | logic level and standard Triacs | |
Fabricantes | STMicroelectronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de BTB10-800BW (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
No Preview Available ! BTA10, BTB10, T10xx
10 A SnubberlessTM, logic level and standard Triacs
Datasheet - production data
Features
Medium current triac
Low thermal resistance with clip bonding
Low thermal resistance insulation ceramic
for insulated BTA
High commutation (4Q) or very high
commutation (3Q, Snubberless™) capability
BTA series UL1557 certified (file ref: 81734)
Packages are RoHS (2002/95/EC) compliant
Description
Available either in through-hole or surface mount
packages, the BTA10, BTB10 and T10xx Triac
series are suitable for general purpose mains
power AC switching. They can be used as
ON/OFF function in applications such as static
relays, heating regulation or induction motor
starting circuit. They are also recommended for
phase control operations in light dimmers and
appliance motors speed controllers.
The Snubberless™ versions (W suffix and T10xx)
are especially recommended for use on inductive
loads, because of their high commutation
performance. By using an internal ceramic pad,
the Snubberless™ series provide an insulated
tab (rated at 2500 VRMS) complying with UL
standards (file reference: E81734).
Table 1: Device summary
Symbol
Parameter
BTA10, BTB10,
T10xx
IT(RMS)
VDRM/VRRM
RMS on-state current
Repetitive peak off-
state voltage
10 A
600 and 800 V
IGT Triggering gate current 25 to 50 mA
February 2017
DocID2937 Rev 7
This is information on a product in full production.
1/14
www.st.com
1 page BTA10, BTB10, T10xx
1.1 Characteristics (curves)
Figure 1: Maximum power dissipation versus
on-state RMS current (full cycle)
Characteristics
Figure 2: RMS on-state current versus case
temperature (full cycle)
Figure 3: Relative variation of thermal impedance
versus pulse duration
Figure 4: On-state characteristics
(maximum values)
Figure 5: Surge peak on-state current versus
number of cycles
Figure 6: Non repetitive surge peak on-state
current versus sinusoidal pulse width (tP < 10 ms)
DocID2937 Rev 7
5/14
5 Page BTA10, BTB10, T10xx
Ordering information
3 Ordering information
Figure 14: BTA10 and BTB10 series ordering information scheme
BT A 10 - 600 BW RG
Triac
Insulation
A = Insulated
B = Non-insulated
Current
10 = 10 A
Voltage
600 = 600 V
800 = 800 V
Sensitivity and type
B = 50 mA standard
C = 25 mA standard
SW = 10 mA logic level
Packing mode
RG = Tube
BW = 50 mA Snubberless™
CW = 35 mA Snubberless™
Figure 15: T10xx series ordering information scheme
Triac
Current
10 = 10 A
Sensitivity
50 =mA
Voltage
800 V
Package
G = D²PAK
Packing mode
( blank) = Tube
-TR = Tape and reel
T 10 50 - 8 G - TR
DocID2937 Rev 7
11/14
11 Page |
Páginas | Total 14 Páginas | |
PDF Descargar | [ Datasheet BTB10-800BW.PDF ] |
Número de pieza | Descripción | Fabricantes |
BTB10-800BW | logic level and standard Triacs | STMicroelectronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |