DataSheetWiki


AT78C1507 fiches techniques PDF

ATMEL Corporation - DVD/CD Read Channel

Numéro de référence AT78C1507
Description DVD/CD Read Channel
Fabricant ATMEL Corporation 
Logo ATMEL Corporation 





1 Page

No Preview Available !





AT78C1507 fiche technique
Features
Operating Supply Range 3.0V to 3.6V
Power Dissipation 1W Max
Low-power Sleep Mode (<0.5 mW)
RF Data Channel
– Automatic Gain Control or Programmable Gain Mode
– Wide Bandwidth VGA
– VGA Accepts Inputs from 30–300 mV Peak-to-peak Differential (PPD),
60–600 mVPPD or 110–1100 mVPPD
– Programmable Equalization via 7th-order Equiripple Filter with Programmable
Symmetric Zeros
– Programmable 5-to-1 Filter Cutoff Range
– Data Slicer with DC Restore Circuit
– Wide Frequency Range Clock Extraction
– Frequency Synthesizer with Independent 7-bit M and 6-bit N Dividers,
Better than 1% Resolution
– Highly Programmable to Accommodate DVD (1–5X) and CD (6–30X)
– Write Asymmetry Measurement for Adjusting Write-mode Power
– Data Recovery Supports CLV, ZCLV, ZCAV Recording
– Optional Internally-generated Timing for AGC and Timing Recovery
Synthesizer Functions
– Supports Wobble Clock Synthesis, Using Low-jitter PLL
Servo Algebra and OPC Functions
– 45 MHz Bandwidth for Differential Phase Tracking Detector
– Land and Groove Detector for DVD RAM
– Supports One Beam Push/Pull Tracking Output
– Supports One Beam Differential Phase Tracking
– Supports Three-beam Push/Pull Tracking Output, Using E, F, G, H
– Focus Error Signal Output
– Focus OK Signal
– Track Crossing Detection
– Mirror Signal Output
– Wobble Detection for DVD RAM, DVD-RW, DVD-R
– Detects Tracking Error OK
– Provides Sample and Hold Functions for CD and DVD OPC
– Formats Pre-pit Data, Using Raw Pre-pit Information from AT78C1503
Header Detection for DVD RAM
DVD/CD Read
Channel
AT78C1503
AT78C1507
Description
The AT78C1503 is a programmable DVD/CD channel responsible for servo algebra, gain con-
trol, equalization, bit detection and clock extraction for CD-ROM, DVD-ROM, DVD-R, DVD-RW
and DVD-RAM formats. Programmable features allow data rates up to 5X DVD. Also, for DVD-
RAM functionality, the channel serves the write path providing laser power control and pit asym-
metry detection. Up to 2X DVD write speeds are supported for DVD-R, DVD-RW and DVD-
RAM. The extracted wobble frequency is supplied to the AT78C1507 companion chip which in
turn synthesizes the write clock.
The AT78C1507 is the companion chip to the AT78C1503 – DVD/CD Read Channel – and the
AT78C1504 – DVD/CD Automatic Laser Power Controller. Working in conjunction with the read
channel, the AT78C1507 is responsible for wobble clock synthesis for DVD-R and DVD-RAM
formats. In addition, the two parts working together also support pre-pit data and clock recovery
for the DVD-R format. Four separate inputs are provided to enable the AT78C1507 to perform
tracking servo algebra, using just the outrigger photo detector signals (E, F, G, H for example)
coming from the OPU. This extends the range of supported tracking servo algebra functions for
the 1503-1507 combination. Lastly, OPC capability is supported for efficient writing of DVD-R,
DVD-RAM and CD-R disks.
Based on CMOS technology, both the AT78C1503 and AT78C1507 operate from a single 3.3V
supply and are fully programmable through serial interfaces for both CD and DVD modes.
Rev. 2054A–DVD–07/02
1

PagesPages 14
Télécharger [ AT78C1507 ]


Fiche technique recommandé

No Description détaillée Fabricant
AT78C1501 DVD / CD ATAPI CONTROLLER ATMEL Corporation
ATMEL Corporation
AT78C1502 DVD/CD Servo ATMEL Corporation
ATMEL Corporation
AT78C1503 DVD/CD Read Channel ATMEL Corporation
ATMEL Corporation
AT78C1507 DVD/CD Read Channel ATMEL Corporation
ATMEL Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche