DataSheetWiki


AT34C02-10PC-2.7 fiches techniques PDF

ATMEL Corporation - 2-Wire Serial EEPROM with Permanent Software Write Protect

Numéro de référence AT34C02-10PC-2.7
Description 2-Wire Serial EEPROM with Permanent Software Write Protect
Fabricant ATMEL Corporation 
Logo ATMEL Corporation 





1 Page

No Preview Available !





AT34C02-10PC-2.7 fiche technique
Features
Permanent Software Write Protection for the First-Half of the Array
– Software Procedure to Verify Write Protect Status
Hardware Write Protection for the Entire Array
Low Voltage and Standard Voltage Operation
– 5.0 (VCC = 4.5V to 5.5V)
– 2.7 (VCC = 2.7V to 5.5V)
– 1.8 (VCC = 1.8V to 5.5V)
Internally Organized 256 x 8
2-Wire Serial Interface
Schmitt Trigger, Filtered Inputs for Noise Suppression
Bidirectional Data Transfer Protocol
100 KHz (1.8V and 2.7V) and 400 KHz (5.0V) Compatibility
16-Byte Page Write Modes
Partial Page Writes Are Allowed
Self-Timed Write Cycle (10 ms max)
High Reliability
– Endurance: 1 Million Write Cycles
– Data Retention: 100 Years
– ESD Protection: >3,000V
Automotive Grade and Extended Temperature Devices Available
8-Pin PDIP, 8-Pin JEDEC SOIC and 8-Pin TSSOP Packages
Description
The AT34C02 provides 2048 bits of serial electrically erasable and programmable
read only memory (EEPROM) organized as 256 words of 8 bits each. The first-half of
the device incorporates a software write protection feature while hardware write pro-
tection for the entire array is available via an external pin as well. Once the software
write protection is enabled, by sending a special command to the device, it cannot be
reversed. The hardware write protection is controlled with the WP pin and can be used
to protect the entire array, whether or not the software write protection has been
enabled. This allows the user to protect none, first-half, or all of the array depending
on the application. The device is optimized for use in many industrial and commercial
applications where low power and low voltage operations are essential. The AT34C02
is available in space saving 8-pin PDIP, 8-pin JEDEC SOIC, and 8-pin TSSOP pack-
ages and is accessed via a 2-wire serial interface. In addition, it is available in 5.0V
(4.5V to 5.5V), 2.7V (2.7V to 5.5V), and 1.8V (1.8V to 5.5V) versions.
Pin Configurations
Pin Name
A0 to A2
SDA
SCL
WP
Function
Address Inputs
Serial Data
Serial Clock Input
Write Protect
8-Pin SOIC
A0
A1
A2
GND
1
2
3
4
8 VCC
7 WP
6 SCL
5 SDA
8-Pin TSSOP
8-Pin PDIP
A0
A1
A2
GND
1
2
3
4
8 VCC
7 WP
6 SCL
5 SDA
A0
A1
A2
GND
1
2
3
4
8 VCC
7 WP
6 SCL
5 SDA
2-Wire Serial
EEPROM
with Permanent
Software Write
Protect
2K (256 x 8)
AT34C02
2-Wire Serial
EEPROM with
Permanent
Software Write
Protec
Rev. 0958D–07/98
1

PagesPages 12
Télécharger [ AT34C02-10PC-2.7 ]


Fiche technique recommandé

No Description détaillée Fabricant
AT34C02-10PC-2.7 2-Wire Serial EEPROM with Permanent Software Write Protect ATMEL Corporation
ATMEL Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche