DataSheetWiki


AD605 fiches techniques PDF

Analog Devices - Dual/ Low Noise/ Single-Supply Variable Gain Amplifier

Numéro de référence AD605
Description Dual/ Low Noise/ Single-Supply Variable Gain Amplifier
Fabricant Analog Devices 
Logo Analog Devices 





1 Page

No Preview Available !





AD605 fiche technique
www.DataSheet4U.com
a
FEATURES
Two Independent Linear-in-dB Channels
Input Noise at Maximum Gain: 1.8 nV/Hz, 2.7 pA/Hz
Bandwidth: 40 MHz (–3 dB)
Differential Input
Absolute Gain Range Programmable:
–14 dB to +34 dB (FBK Shorted to OUT) Through
0 dB to +48 dB (FBK Open)
Variable Gain Scaling: 20 dB/V Through 40 dB/V
Stable Gain with Temperature and Supply Variations
Single-Ended Unipolar Gain Control
Output Common-Mode Independently Set
Power Shutdown at Lower End of Gain Control
Single 5 V Supply
Low Power: 90 mW/Channel
Drives A/D Converters Directly
APPLICATIONS
Ultrasound and Sonar Time-Gain Control
High Performance AGC Systems
Signal Measurement
Dual, Low Noise, Single-Supply
Variable Gain Amplifier
AD605
FUNCTIONAL BLOCK DIAGRAM
VGN
VREF
GAIN
CONTROL
AND
SCALING
PRECISION PASSIVE
INPUT ATTENUATOR
+IN DIFFERENTIAL
ATTENUATOR
–IN 0 TO –48.4dB
FIXED GAIN
AMPLIFIER
+34.4dB
OUT
FBK
VOCM
AD605
GENERAL DESCRIPTION
The AD605 is a low noise, accurate, dual channel, linear-in-dB
variable gain amplifier, which is optimized for any application
requiring high performance, wide bandwidth variable gain con-
trol. Operating from a single 5 V supply, the AD605 provides
differential inputs and unipolar gain control for ease of use.
Added flexibility is achieved with a user-determined gain range
and an external reference input which provides user-determined
gain scaling (dB/V).
The high performance linear-in-dB response of the AD605 is
achieved with the differential input, single supply, exponential
amplifier (DSX-AMP) architecture. Each of the DSX-AMPs
comprise a variable attenuator of 0 dB to –48.4 dB followed by
a high speed fixed gain amplifier. The attenuator is based on a
7-stage R-1.5R ladder network. The attenuation between tap
points is 6.908 dB, and 48.360 dB for the entire ladder network.
The DSX-AMP architecture results in 1.8 nV/Hz input noise
spectral density and will accept a ± 2.0 V input signal when
VOCM is biased at VP/2.
Each independent channel of the AD605 provides a gain range
of 48 dB which can be optimized for the application. Gain
ranges between –14 dB to +34 dB and 0 dB to +48 dB can be
selected by a single resistor between pins FBK and OUT. The
lower and upper gain ranges are determined by shorting pin
FBK to OUT, or leaving pin FBK unconnected, respectively.
The two channels of the AD605 can be cascaded to provide 96
dB of very accurate gain range in a monolithic package.
The gain control interface provides an input resistance of approxi-
mately 2 Mand scale factors from 20 dB/V to 30 dB/V for a
VREF input voltage of 2.5 V to 1.67 V, respectively. Note that
scale factors up to 40 dB/V are achievable with reduced accu-
racy for scales above 30 dB/V. The gain scales linearly in dB
with control voltages (VGN) of 0.4 V to 2.4 V for the 20 dB/V
scale and 0.20 V to 1.20 V for the 40 dB/V scale. When VGN
is <50 mV the amplifier is powered down to draw 1.9 mA.
Under normal operation, the quiescent supply current of each
amplifier channel is only 18 mA.
The AD605 is available in 16-lead PDIP and SOIC, and is
guaranteed for operation over the –40°C to +85°C tempera-
ture range.
REV. C
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties that
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
www.analog.com
Fax: 781/326-8703 © 2004 Analog Devices, Inc. All rights reserved.

PagesPages 12
Télécharger [ AD605 ]


Fiche technique recommandé

No Description détaillée Fabricant
AD600 Dual/ Low Noise/ Wideband Variable Gain Amplifiers Analog Devices
Analog Devices
AD602 Dual/ Low Noise/ Wideband Variable Gain Amplifiers Analog Devices
Analog Devices
AD6025GP Fan ADDA
ADDA
AD603 Variable Gain Amplifier Analog Devices
Analog Devices

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche