DataSheetWiki


AD7111 fiches techniques PDF

Analog Devices - LC2MOS LOGDAC Logarithmic D/A Converter

Numéro de référence AD7111
Description LC2MOS LOGDAC Logarithmic D/A Converter
Fabricant Analog Devices 
Logo Analog Devices 





1 Page

No Preview Available !





AD7111 fiche technique
a
FEATURES
Dynamic Range: 88.5 dB
Resolution: 0.375 dB
On-Chip Data Latches
+5 V Operation
AD7111A Pin Compatible with AD7524
Low Power
APPLICATIONS
Audio Attenuators
Sonar Systems
Function Generators
Digitally Controlled AGC System
LC2MOS LOGDAC
Logarithmic D/A Converter
AD7111/AD7111A
FUNCTIONAL BLOCK DIAGRAMS
VDD
VIN
AD7111
17-BIT DAC
RFB
I OUT
AGND
17-BIT LATCH
DECODE LOGIC
GENERAL DESCRIPTION
The LOGDAC® AD7111/AD7111A are monolithic multiplying
D/A converters featuring wide dynamic range in a small pack-
age. Both DACs can attenuate an analog input signal over the
range 0 dB to 88.5 dB in 0.375 dB steps. They are available in
16-pin DIPs and SOIC packages. The AD7111 is also available
in a 20-terminal LCCC package.
The degree of attenuation across the DAC is determined by an
8-bit word applied to the onboard decode logic. This 8-bit word
is decoded into a 17-bit word which is then applied to a 17-bit
R-2R ladder. The very fine step resolution, which is available
over the entire dynamic range, is due to the use of this 17-bit
DAC.
The AD7111/AD7111A are easily interfaced to a standard 8-bit
MPU bus via an 8-bit data port and standard microprocessor
control lines. The AD7111 WR input is edge triggered and re-
quires a rising edge to load new data to the DAC. The AD7111A
WR is level triggered to allow transparent operation of the
latches, if required. It should also be noted that the AD7111A is
exactly pin and function-compatible with the AD7524, an in-
dustry standard 8-bit multiplying DAC. This allows an easy up-
grading of existing AD7524 designs which would benefit both
from the wider dynamic range and the finer step resolution of-
fered by the AD7111A.
The AD7111/AD7111A are fabricated in Linear Compatible
CMOS (LC2MOS), an advanced, mixed technology process that
combines precision bipolar circuits with low power CMOS logic.
LOGDAC is a registered trademark of Analog Devices, Inc.
CONTROL LOGIC
8-BIT BUFFER
CS WR
VDD
VIN
D0 – D7
AD7111A
17-BIT DAC
DGND
RFB
I OUT
AGND
17-BIT LATCH
DECODE LOGIC
CONTROL LOGIC
8-BIT BUFFER
CS WR
D0 – D7
DGND
PRODUCT HIGHLIGHTS
1. Wide Dynamic Range: 0 dB to 88.5 dB attenuation range in
0.375 dB steps.
2. Small Package: The AD7111/AD7111A are available in
16-pin DIPs and SOIC packages.
3. Transparent Latch Operation: By tying the CS and WR in-
puts low, the DAC latches in the AD7111A can be made
transparent.
4. Fast Microprocessor Interface: Data setup times of 25 ns and
write pulse width of 57 ns make the AD7111A compatible
with modern microprocessors.
REV. 0
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 617/329-4700
Fax: 617/326-8703

PagesPages 8
Télécharger [ AD7111 ]


Fiche technique recommandé

No Description détaillée Fabricant
AD711 BiFET Op Amp Analog Devices
Analog Devices
AD7110 Digitally Controlled Audio Attenuator Analog Devices
Analog Devices
AD7111 LC2MOS LOGDAC Logarithmic D/A Converter Analog Devices
Analog Devices
AD7111A LC2MOS LOGDAC Logarithmic D/A Converter Analog Devices
Analog Devices

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche