DataSheetWiki


A1-16PA-2.54DS fiches techniques PDF

Hirose Electric - 2.54mm Pitch High Density Connector

Numéro de référence A1-16PA-2.54DS
Description 2.54mm Pitch High Density Connector
Fabricant Hirose Electric 
Logo Hirose Electric 





1 Page

No Preview Available !





A1-16PA-2.54DS fiche technique
2.54mm Pitch High Density Connector
A1 and A2 Series
sFeatures
1. High Density Mounting
Connectors are aligned in the longitudinal direction on the
2.54 mm mesh board, so that no idle space can occur.
2. Variation in Number of Contacts
The A1 series contains 16 types of 6 to 64 contacts, while
the A2 series contains 20 types of 1 to 20 contacts,
3. Compatibility
The A1 series is compatible with HIF3B series cable side
and HIF3H receptacle for wide applications.
sProduct Specifications
Current rating: 3A
Operating Temperature Range: -55 to +85ç (Note 1) Storage Temperature Range: -10 to +60ç (Note 2)
Rating
Voltage rating: 200V AC Operating Moisture Range:
40 to 80%
Storage Humidity Range:
40 to 70% (Note 2)
Item
1. Insulation Resistance
2. Withstanding voltage
3. Contact Resistance
4. Vibration
5.Humidity (Steady state)
Specification
1000M ohms min.
No flashover or insulation breakdown.
15m ohms max.
No electrical discontinuity of 1µs or more
Insulation resistance 1000M ohms min.
6. Temperature Cycle
No damage, cracks, or parts looseness.
7. Operating Life
Contact resistance: 15m ohms max.
8. Resistance to Soldering heat No deformation of components affecting performance.
Condition
500V DC
650V AC/1 minute
0.1A
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
(-65ç: 30 minutes 15 to 35ç: 5 minutes max.
125ç: 30 minutes15 to 35ç: 5 minutes max.) 5 cycles
500 cycles
Flow: 260ç for 10 seconds
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
sApplications
Computers, VTR, and other various kinds of electronic equipment
sMaterial
Part
Pin header
Insulator
Contact
Crimping socket
Crimping contact
Material
PBT
Brass
Polyamid
Phosphor bronze
Finish
Black
Selective gold plated
Black
Selective gold plated
Remarks
UL94V-0
–––––––
UL94V-0
–––––––
C2

PagesPages 8
Télécharger [ A1-16PA-2.54DS ]


Fiche technique recommandé

No Description détaillée Fabricant
A1-16PA-2.54DS 2.54mm Pitch High Density Connector Hirose Electric
Hirose Electric
A1-16PA-2.54DSA 2.54mm Pitch High Density Connector Hirose Electric
Hirose Electric

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche