DataSheetWiki


A3212 fiches techniques PDF

Allegro MicroSystems - Micropower, Ultrasensitive Hall-Effect Switches

Numéro de référence A3212
Description Micropower, Ultrasensitive Hall-Effect Switches
Fabricant Allegro MicroSystems 
Logo Allegro MicroSystems 





1 Page

No Preview Available !





A3212 fiche technique
FEATURES AND BENEFITS
• AEC-Q100 automotive qualified
• Micropower operation
• Operation with north or south pole
• 2.5 to 3.5 V battery operation
• Chopper stabilized
□Superior temperature stability
□Extremely low switchpoint drift
□Insensitive to physical stress
• High ESD protection
• Solid-state reliability
• Small size
• Easily manufacturable with magnet pole independence
Packages:
DFN (EL)
DFN (EH)
SOT23W (LH) Not to scale
SIP (UA)
A3211 and A3212
Micropower, Ultrasensitive
Hall-Effect Switches
DESCRIPTION
TheA3211 andA3212 integrated circuits are ultrasensitive, pole
independent Hall-effect switches with latched digital output.
These devices are especially suited for operation in battery-
operated, hand-held equipment such as cellular and cordless
telephones, pagers, and palmtop computers. A 2.5 to 3.5 V
operation and a unique clocking scheme reduce the average
operating power requirements to less than 15 μW with a
2.75 V supply.
Unlike other Hall-effect switches, either a north or south pole
of sufficient strength will turn the output on in the A3212,
and in the absence of a magnetic field, the output is off. The
A3211 provides an inverted output. The polarity independence
and minimal power requirements allow these devices to easily
replace reed switches for superior reliability and ease of
manufacturing, while eliminating the requirement for signal
conditioning.
Improved stability is made possible through chopper
stabilization (dynamic offset cancellation), which reduces the
residual offset voltage normally caused by device overmolding,
temperature dependencies, and thermal stress.
This device includes on a single silicon chip a Hall-voltage
generator, small-signal amplifier, chopper stabilization, a
latch, and a MOSFET output. Advanced CMOS processing
is used to take advantage of low-voltage and low-power
Continued on next page....
SUPPLY
SWITCH
X
TIMING
LOGIC
OUTPUT
GROUND
3211-DS, Rev. 22
Functional Block Diagram
Dwg. FH-020-5

PagesPages 13
Télécharger [ A3212 ]


Fiche technique recommandé

No Description détaillée Fabricant
A3210-LH MICROPOWER/ ULTRA-SENSITIVE HALL-EFFECT SWITCHES Allegro MicroSystems
Allegro MicroSystems
A3210-UA MICROPOWER/ ULTRA-SENSITIVE HALL-EFFECT SWITCHES Allegro MicroSystems
Allegro MicroSystems
A32100DX Integrator Series FPGAs Actel
Actel
A32100DX HiRel FPGAs Actel
Actel

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche