|
|
Número de pieza | AT27C010 | |
Descripción | 1 Megabit 128K x 8 OTP CMOS EPROM | |
Fabricantes | ATMEL Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AT27C010 (archivo pdf) en la parte inferior de esta página. Total 13 Páginas | ||
No Preview Available ! Features
• Fast read access time – 45ns
• Low-power CMOS operation
– 100µA max standby
– 25mA max active at 5MHz
• JEDEC standard packages
– 32-lead PDIP
– 32-lead PLCC
• 5V ±10% supply
• High-reliability CMOS technology
– 2000V ESD protection
– 200mA latchup immunity
• Rapid programming algorithm – 100 µs/byte (typical)
• CMOS- and TTL-compatible inputs and outputs
• Integrated product identification code
• Industrial temperature range
• Green (Pb/halide-free) packaging option
1Mb (128K x 8)
One-time
Programmable,
Read-only Memory
Atmel AT27C010
1. Description
The Atmel® AT27C010 is a low-power, high-performance 1,048,576-bit, one-time pro-
grammable, read-only memory (OTP EPROM) organized as 128K by 8 bits. Thedevice
requires only one 5V power supply in normal read mode operation. Any byte can be
accessed in less than 45ns, eliminating the need for speed reducing WAIT states on high-
performance microprocessor systems.
In read mode, the AT27C010 typically consumes only 8mA. Standby mode supply current
is typically less than 10µA.
The AT27C010 is available in a choice of industry standard, JEDEC approved, one-time pro-
grammable (OTP) PDIP and PLCC packages. All devices feature two-line control (CE, OE)
to give designers the flexibility to prevent bus contention.
With 128K byte storage capability, the AT27C010 allows firmware to be stored reliably and
to be accessed by the system without the delays of mass storage media.
The AT27C010 has additional features to ensure high quality and efficient production use.
The rapid programming algorithm reduces the time required to program the part and guar-
antees reliable programming. Programming time is typically only 100 µs/byte. The
integrated product identification code electronically identifies the device and manufacturer.
This feature is used by industry standard programming equipment to select the proper pro-
gramming algorithms and voltages.
0321N–EPROM–4/11
1 page Figure 5-2. Input test waveforms and measurement levels
For -45 devices only:
tR, tF < 5ns (10% to 90%)
For -70 devices:
tR, tF < 20ns (10% to 90%)
Figure 5-3. Output test load
Atmel AT27C010
CL = 100pF including jig capacitance, except for the -45
devices, where CL = 30pF
Table 5-5. Pin capacitance
f = 1MHz, T = 25°C(1)
Symbol
Typ
Max Units
CIN
COUT
Note:
4 8 pF
8 12 pF
1. Typical values for nominal supply voltage. This parameter is only sampled, and is not 100% tested.
Conditions
VIN = 0V
VOUT = 0V
0321N–EPROM–4/11
5
5 Page 32P6 – PDIP
D
PIN
1
E1
Atmel AT27C010
A
SEATING PLANE
L
e
C
B1
E
eB
A1
B
0º ~ 15º REF
Note: 1. Dimensions D and E1 do not include mold Flash or Protrusion.
Mold Flash or Protrusion shall not exceed 0.25mm (0.010").
COMMON DIMENSIONS
(Unit of Measure = mm)
SYMBOL
A
A1
D
E
E1
B
B1
L
C
eB
e
MIN NOM MAX
– – 4.826
0.381
–
–
41.783 – 42.291
15.240 – 15.875
13.462 – 13.970
0.356 – 0.559
1.041 – 1.651
3.048 – 3.556
0.203 – 0.381
15.494 – 17.526
2.540 TYP
NOTE
Note 1
Note 1
Package Drawing Contact:
TITLE
32P6, 32-lead (0.600"/15.24mm wide) Plastic Dual
Inline Package (PDIP)
09/28/01
DRAWING NO. REV.
32P6
B
0321N–EPROM–4/11
11
11 Page |
Páginas | Total 13 Páginas | |
PDF Descargar | [ Datasheet AT27C010.PDF ] |
Número de pieza | Descripción | Fabricantes |
AT27C010 | 1 Megabit 128K x 8 OTP CMOS EPROM | ATMEL Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |