DataSheetWiki

AT-114 Datasheet دیتاشیت PDF دانلود

دیتاشیت - Hirose Electric - Fixed Attenuators (SMA Type)

شماره قطعه AT-114
شرح مفصل Fixed Attenuators (SMA Type)
تولید کننده Hirose Electric 
آرم Hirose Electric 


1 Page

		

No Preview Available !

AT-114 شرح
Fixed Attenuators (SMA Type)
AT-100, AT-200, and AT-300 Series
sFeatures
1.Abundant Variations of Attenuators
Attenuation amounts are available in abundant
variations from 0 to 4 dB in 0.5 dB steps, from 4 to
10 dB in 1 dB steps, and in 12, 13, 15, 20, 26 and
30 dB so that levels can be finely adjusted.
AT-103
AT-206
AT-310
2.SMA Type
The coupling portions are available in all types of
plug and jack combinations and stainless steel is
used for the external cladding to form a small and
durable structure.
3.High Degree of Matching and High Reliability
The design of the attenuation element uses a
distributed constant circuit and metal film resistor. A
high degree of matching is achieved as indicated in
the VSWR of the appended tables. Furthermore,
these attenuators show stable characteristics for
environments of varying temperature, humidity, and
gases.
sProduct Specifications
Ratings
Rated frequency range (Note)
Characteristic impedance
Maximum Input Power
DC to 18.0 GHz
50 ohms
1W
Note: The frequency range will differ depending on the model.
Item
Standard
1.Vibration
2.Shock
No electrical discontinuity of 1 µs or more
No damage, cracks, or parts dislocation
3.Temperature cycle No damage, cracks, or parts dislocation
qThe test method conforms to MIL-STD-202.
Operating temperature range
Operating relative humidity
-10ç to +65ç
95% Max.
Conditions
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s2 for 2 hours in each of 3 directions
Acceleration of 490 m/s2, sine half-wave waveform,
3 cycles in each of the 3 axis
Temperature: -55ç ¡ +5ç to +35ç ¡ +85ç ¡ +5ç to +35ç
Time: 30 ¡ 15 max. ¡ 30 ¡ 15 max. (Minutes)
200 cycles
sMaterials
Part
Connector Body
Insulator
Male contacts
Female contacts
Attenuation element
Material
Stainless steel
PTFE
Beryllium copper
Beryllium copper
Metal film
Finish
Passivated
----------
Gold plating
Gold plating
----------
sOrdering Information
AT - 1 00-(0)
1 23
1 AT: Indicates a fixed attenuator
2 Indicates the Series Name (Coupling Portion)
1: SMA plug - jack
2: SMA plug - plug
3: SMA jack - jack
3 Attenuation
01 : 1dB
06 : 6dB
00-(0) : 0dB
(Through)
00-(0.5) : 0.5dB
00-(3.5) : 3.5dB
78

قانون اساسیصفحه 3
دانلود [ AT-114 دیتاشیت ]



دیتاشیت توصیه

شماره قطعه شرح مفصل تولید کنندگان
AT-110 Voltage Variable Absorptive Attenuator/ 30 dB 0.5 - 2 GHz Tyco Electronics
Tyco Electronics
AT-110 Fixed Attenuators (SMA Type) Hirose Electric
Hirose Electric
AT-1103 High Power Fixed Attenuators (Radiator built-in) Hirose Electric
Hirose Electric
AT-1104NC CCFL BACKLIGHT INVERTER PIS
PIS

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2018   |   تماس با ما  |   جستجو