DataSheetWiki


AT-260TR fiches techniques PDF

Tyco Electronics - Digital Attenuator/ 31 dB/ 5-Bit DC . 2 GHz

Numéro de référence AT-260TR
Description Digital Attenuator/ 31 dB/ 5-Bit DC . 2 GHz
Fabricant Tyco Electronics 
Logo Tyco Electronics 





1 Page

No Preview Available !





AT-260TR fiche technique
Digital Attenuator, 31 dB, 5-Bit
DC – 2 GHz
Features
q Attenuation: 1-dB Steps to 31 dB
q Temperature Stability: ± 0.15 dB from -40°C
to +85°C Typical
q Ultra Low DC Power Consumption
q Low Intermodulation Products: IP3 = 50 dBm
q Low Cost SSOP 20 Plastic Package
q Tape and Reel Packaging Available
SSOP-20
AT-260
V 2.00
Description
M/A-COM's AT-260 is a 5-bit, 1-dB step GaAs MMIC digi-
tal attenuator in a low cost SSOP-20 surface mount plastic
package. The AT-260 is ideally suited for use where high
accuracy, fast switching, very low power consumption and
low intermodulation products are required at a low cost.
Typical applications include radio and cellular equipment,
wireless LANS, GPS equipment and other Gain/Level
Control circuits.
The AT-260 is fabricated with a monolithic GaAs MMIC
using a mature 1-micron process. The process features full
chip passivation for increased performance and reliability.
Electrical Specifications, TA = 25°C
Ordering Information
Part No.
Package
AT-260 PIN
AT-260TR
AT-260RTR
SSOP 20-Lead
Forward Tape & Reel*
Reverse Tape & Reel*
* If specific reel size is requIred, consult factory for part number
assignment.
Parameter
Reference
Insertion Loss
Attenuation
Accuracy2
VSWR
Trise, Tfall
Ton, Toff
Transients
One dB
Compression
IP2
IP3
(any state)
Test Conditions1
DC – 0.1 GHz
DC – 0.5 GHz
DC – 1.0 GHz
DC – 2.0 GHz
DC – 1.0 GHz
DC – 2.0 GHz
10% to 90% RF, 90% to 10% RF
50% Control to 90% RF, 50% Control to 10% RF
In Band
Input Power
Input Power
0.05 GHz
0.5-2.0 GHz
Measured Relative
0.05 GHz
to Input Power
0.5-2.0 GHz
(for two-tone input power up to +5 dBm)
Measured Relative
0.05 GHz
to Input Power
0.5-2.0 GHz
(for two-tone input power up to +5 dBm)
Unit
Min.
Typ.
Max
dB 1.6 1.8
dB 1.7 1.9
dB 1.9 2.2
dB 2.2 2.5
± (0.20 dB + 3% of Atten. Setting in dB) dB
± (0.30 dB + 3% of Atten.Setting in dB) dB
1.5:1
nS 8
nS 15
mV 2
dBm
dBm
20
27
dBm
dBm
45
60
dBm
dBm
34
50
1. All measurements at 1 GHz in a 50system, unless otherwise specified.
2.Attenuation accuracy specifications apply with negative bias control and low inductance grounding.

PagesPages 2
Télécharger [ AT-260TR ]


Fiche technique recommandé

No Description détaillée Fabricant
AT-260TR Digital Attenuator/ 31 dB/ 5-Bit DC . 2 GHz Tyco Electronics
Tyco Electronics

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche