|
|
Numéro de référence | HT-1-1 | ||
Description | Stripline Mounting Non-reflective Terminations | ||
Fabricant | Hirose Electric | ||
Logo | |||
1 Page
Stripline Mounting Non-reflective Terminations
HT Series
HT-30-1
HT-50-1
HT-10-2
HT-20-3
HT-1-3
HT-1-2
HT-1-1 HT-025-1 HT-05-2 HT-025-2
sFeatures
1.High Performance
These super wide bandwidth/ultra high matching
non-reflective termination use Hirose Electric
original high frequency matching technology.
2.Equipped with Tabs
Termination are equipped with tabs to permit direct
mounting to flat circuits.
3.Housing functions as a radiator to
permit small size and high-density
mounting.
sProduct Specifications
Ratings
Rated frequency range (Note)
Characteristic impedance
Maximum Input Power (Note)
DC to 15.0 GHz
50 ohms
0.25 to 50 W
Operating temperature range
Operating relative humidity
NOTE: The frequency range and the maximum input power will differ depending on the products.
-10ç to +60ç
95% Max.
HT-025-1, HT-025-2, HT-05-2, HT-1-1, HT-1-2, HT-1-3, HT-10-2, HT-20-3, and HT-50-1
Item
Standard
Conditions
1.Vibration
2.Shock
No electrical discontinuity of 1 µs or more
No damage, cracks, or parts dislocation
3.Temperature cycle No damage, cracks, or parts dislocation
qThe test method conforms to MIL-STD-202.
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s2 for 2 hours in each of 3 directions
Acceleration of 490 m/s2, sine half-wave waveform,
3 cycles in each of the 3 axis
Temperature: -55ç ¡ +5ç to +35ç ¡ +85ç ¡ +5ç to +35ç
Time: 30 ¡ 15 max. ¡ 30 ¡15 max. (Minutes)
200 cycles
HT-30-1
Item
Standard
Conditions
1.Vibration
2.Shock
No electrical discontinuity of 1 µs or more
No damage, cracks, or parts dislocation
3.Temperature cycle No damage, cracks, or parts dislocation
qThe test method conforms to MIL-STD-202.
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s2 for 2 hours in each of 3 directions
Acceleration of 294 m/s2, sine half-wave waveform,
3 cycles in each of the 3 axis
Temperature: -55ç ¡ +5ç to +35ç ¡ +120ç ¡ +5ç to +35ç
Time: 30 ¡ 15 max. ¡ 30 ¡15 max. (Minutes)
200 cycles
sMaterials
HT-025-1, HT-025-2, and HT-05-2
HT-1-1, HT-1-2, and HT-1-3
Part
Tabs
Resistor
HT-30-1
Part
Plate
Retaining plate
Tabs
Resistor
Material
Copper
Metal film
Finish
Solder plating
----------
Material
Aluminum
Phosphor bronze
Copper
Metal film
Finish
Conductive alumite
Nickel plating
Tin plating
----------
Part
Plate
Tabs
Resistor
Material
Aluminum
Copper
Metal film
Finish
Nickel plating
Solder plating
----------
HT-10-2, HT-20-3, and HT-50-1
Part Material
Plate
Copper
Tabs
Copper
Resistor
Metal film
Finish
Nickel plating
Silver plating
----------
72
|
|||
Pages | Pages 5 | ||
Télécharger | [ HT-1-1 ] |
No | Description détaillée | Fabricant |
HT-1-1 | Stripline Mounting Non-reflective Terminations | Hirose Electric |
HT-1-2 | Stripline Mounting Non-reflective Terminations | Hirose Electric |
HT-1-3 | Stripline Mounting Non-reflective Terminations | Hirose Electric |
US18650VTC5A | Lithium-Ion Battery | Sony |
TSPC106 | PCI Bus Bridge Memory Controller | ATMEL |
TP9380 | NPN SILICON RF POWER TRANSISTOR | Advanced Semiconductor |
www.DataSheetWiki.com | 2020 | Contactez-nous | Recherche |