|
|
PDF HUF75332P3 Data sheet ( Hoja de datos )
| Número de pieza | HUF75332P3 | |
| Descripción | 60A/ 55V/ 0.019 Ohm/ N-Channel UltraFET Power MOSFETs | |
| Fabricantes | Intersil Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HUF75332P3 (archivo pdf) en la parte inferior de esta página. Total 18 Páginas | ||
|
No Preview Available !
HUF75332G3, HUF75332P3, HUF75332S3S
Data Sheet
June 1999 File Number 4489.3
60A, 55V, 0.019 Ohm, N-Channel UltraFET
Power MOSFETs
These N-Channel power MOSFETs
are manufactured using the
innovative UltraFET™ process.
This advanced process technology
achieves the lowest possible on-resistance per silicon area,
resulting in outstanding performance. This device is capable
of withstanding high energy in the avalanche mode and the
diode exhibits very low reverse recovery time and stored
charge. It was designed for use in applications where power
efficiency is important, such as switching regulators,
switching converters, motor drivers, relay drivers, low-
voltage bus switches, and power management in portable
and battery-operated products.
Formerly developmental type TA75332.
Ordering Information
PART NUMBER
PACKAGE
BRAND
HUF75332G3
TO-247
75332G
HUF75332P3
TO-220AB
75332P
HUF75332S3S
TO-263AB
75332S
NOTE: When ordering, use the entire part number. Add the suffix T to
obtain the TO-263AB variant in tape and reel, e.g., HUF75332S3ST.
Packaging
JEDEC STYLE TO-247
SOURCE
DRAIN
GATE
Features
• 60A, 55V
• Simulation Models
- Temperature Compensated PSPICE® and SABER©
Models
- SPICE and SABER Thermal Impedance Models
Available on the WEB at: www.intersil.com
• Peak Current vs Pulse Width Curve
• UIS Rating Curve
• Related Literature
- TB334, “Guidelines for Soldering Surface Mount
Components to PC Boards”
Symbol
D
G
S
JEDEC TO-220AB
DRAIN
(FLANGE)
SOURCE
DRAIN
GATE
DRAIN
(TAB)
JEDEC TO-263AB
GATE
SOURCE
DRAIN
(FLANGE)
94 CAUTION: These devices are sensitive to electrostatic discharge; follow proper ESD Handling Procedures.
UltraFET™ is a trademark of Intersil Corporation. PSPICE® is a registered trademark of MicroSim Corporation.
SABER© is a Copyright of Analogy, Inc. http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999
1 page  
HUF75332G3, HUF75332P3, HUF75332S3S
Typical Performance Curves (Continued)
2.5
PULSE DURATION = 80µs
DUTY CYCLE = 0.5% MAX
VGS = 10V, ID = 60A
2.0
1.5
1.0
1.2
1.0
0.8
VGS = VDS, ID = 250µA
0.5
-80
-40 0 40 80 120 160
TJ, JUNCTION TEMPERATURE (oC)
200
FIGURE 9. NORMALIZED DRAIN TO SOURCE ON
RESISTANCE vs JUNCTION TEMPERATURE
0.6
-80
-40 0
40 80 120 160
TJ, JUNCTION TEMPERATURE (oC)
200
FIGURE 10. NORMALIZED GATE THRESHOLD VOLTAGE vs
JUNCTION TEMPERATURE
1.2
ID = 250µA
1.1
1.0
0.9
-80
-40 0 40 80 120 160
TJ, JUNCTION TEMPERATURE (oC)
200
FIGURE 11. NORMALIZED DRAIN TO SOURCE BREAKDOWN
VOLTAGE vs JUNCTION TEMPERATURE
10
2000
1500
1000
CISS
VGS = 0V, f = 1MHz
CISS = CGS + CGD
CRSS = CGD
COSS ≈ CDS + CGD
500
0
0
COSS
CRSS
10 20 30 40 50
VDS, DRAIN TO SOURCE VOLTAGE (V)
60
FIGURE 12. CAPACITANCE vs DRAIN TO SOURCE VOLTAGE
8
6
4 WAVEFORMS IN
DESCENDING ORDER:
ID = 60A
2 ID = 45A
ID = 30A
VDD = 30V
ID = 15A
0
0 10 20 30 40 50 60
Qg, GATE CHARGE (nC)
NOTE: Refer to Intersil Application Notes AN7254 and AN7260.
FIGURE 13. GATE CHARGE WAVEFORMS FOR CONSTANT GATE CURRENT
98
5 Page 
HUF75332G3, HUF75332P3, HUF75332S3S
Absolute Maximum Ratings TC = 25oC, Unless Otherwise Specified
UNITS
Drain to Source Voltage (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDSS
Drain to Gate Voltage (RGS = 20kΩ) (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDGR
Gate to Source Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VGS
Drain Current
55 V
55 V
±20 V
Continuous (Figure 2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ID
Pulsed Drain Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IDM
Pulsed Avalanche Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EAS
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD
Derate Above 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TJ, TSTG
Maximum Temperature for Soldering
Leads at 0.063in (1.6mm) from Case for 10s. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TL
Package Body for 10s, See Techbrief 334 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tpkg
60
Figure 4
Figures 6, 14, 15
145
0.97
-55 to 175
300
260
A
W
W/oC
oC
oC
oC
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
1. TJ = 25oC to 150oC.
Electrical Specifications TC = 25oC, Unless Otherwise Specified
PARAMETER
SYMBOL
TEST CONDITIONS
OFF STATE SPECIFICATIONS
Drain to Source Breakdown Voltage
Zero Gate Voltage Drain Current
Gate to Source Leakage Current
ON STATE SPECIFICATIONS
BVDSS
IDSS
IGSS
ID = 250µA, VGS = 0V (Figure 11)
VDS = 50V, VGS = 0V
VDS = 45V, VGS = 0V, TC = 150oC
VGS = ±20V
Gate to Source Threshold Voltage
Drain to Source On Resistance
THERMAL SPECIFICATIONS
VGS(TH)
rDS(ON)
VGS = VDS, ID = 250µA (Figure 10)
ID = 60A, VGS = 10V (Figure 9)
Thermal Resistance Junction to Case
Thermal Resistance Junction to Ambient
RθJC
RθJA
(Figure 3)
TO-247
TO-220, TO-263
SWITCHING SPECIFICATIONS (VGS = 10V)
Turn-On Time
tON
Turn-On Delay Time
td(ON)
Rise Time
tr
Turn-Off Delay Time
td(OFF)
Fall Time
tf
Turn-Off Time
tOFF
GATE CHARGE SPECIFICATIONS
VDD = 30V, ID ≅ 60A,
RL = 0.50Ω, VGS = 10V,
RGS = 6.8Ω
Total Gate Charge
Gate Charge at 10V
Threshold Gate Charge
Gate to Source Gate Charge
Reverse Transfer Capacitance
Qg(TOT)
Qg(10)
Qg(TH)
Qgs
Qgd
VGS = 0V to 20V
VGS = 0V to 10V
VGS = 0V to 2V
VDD = 30V,
ID ≅ 60A,
RL = 0.50Ω
Ig(REF) = 1.0mA
(Figure 13)
MIN TYP MAX UNITS
55 - - V
- - 1 µA
- - 250 µA
-
-
±100
nA
2-4V
- 0.016 0.019 Ω
- - 1.03 oC/W
- - 30 oC/W
- - 62 oC/W
- - 100 ns
- 12 -
ns
- 55 -
ns
- 11 -
ns
- 25 -
ns
- - 55 ns
- 70 85 nC
- 40 50 nC
-
2.5 3.0
nC
- 6 - nC
- 15 - nC
95
11 Page | ||
| Páginas | Total 18 Páginas | |
| PDF Descargar | [ Datasheet HUF75332P3.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HUF75332P3 | 60A/ 55V/ 0.019 Ohm/ N-Channel UltraFET Power MOSFETs |  Fairchild Semiconductor |
| HUF75332P3 | 60A/ 55V/ 0.019 Ohm/ N-Channel UltraFET Power MOSFETs | Intersil Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |